broadcom/b43/phy_g.h

1 /* SPDX-License-Identifier: GPL-2.0 */
5 /* OFDM PHY registers are defined in the A-PHY header. */
9 #define B43_PHY_VERSION_CCK		B43_PHY_CCK(0x00)	/* Versioning register for B-PHY */
24 /* Extended G-PHY Registers */
26 #define B43_PHY_GTABCTL			B43_PHY_EXTG(0x03)	/* G-PHY table control (see below) */
27 #define  B43_PHY_GTABOFF		0x03FF	/* G-PHY table offset (see below) */
28 #define  B43_PHY_GTABNR			0xFC00	/* G-PHY table number (see below) */
30 #define B43_PHY_GTABDATA		B43_PHY_EXTG(0x04)	/* G-PHY table data */
49 /*** G-PHY table numbers */
50 #define B43_GTAB(number, offset)	(((number) << B43_PHY_GTABNR_SHIFT) | (offset))  argument
55 u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset);
56 void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value);
61 	(((phy)->rev >= 2) &&			\
62 	 ((phy)->radio_ver == 0x2050) &&	\
63 	 ((phy)->radio_rev == 8))
64 /* Card uses the loopback gain stuff */
66 	(((phy)->rev > 1) || ((phy)->gmode))
86 	return ((a->att == b->att) &&  in b43_compare_rfatt()
87 		(a->with_padmix == b->with_padmix));  in b43_compare_rfatt()
107 	return (a->att == b->att);  in b43_compare_bbatt()
111 #define B43_TXCTL_PA3DB		0x40	/* PA Gain 3dB */
112 #define B43_TXCTL_PA2DB		0x20	/* PA Gain 2dB */
113 #define B43_TXCTL_TXMIX		0x10	/* TX Mixer Gain */
137 	 * TSSI value to dBm-Q5.2 */
159 	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
160 	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
169 	 * bit 0-11:  offset
170 	 * bit 12-15: register ID
171 	 * bit 16-32: value