Lines Matching +full:40 +full:mhz

150 	WCN36XX_HAL_DEL_BA_REQ = 40,
408 	/* 20MHz IF bandwidth centered on IF carrier */
411 	/* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */
414 	/* 40MHz IF bandwidth centered on IF carrier */
417 	/* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */
420 	/* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */
423 	/* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */
426 	/* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */
429 	/* 20/40MHZ offset LOW 40/80MHZ offset LOW */
432 	/* 20/40MHZ offset HIGH 40/80MHZ offset LOW */
435 	/* 20/40MHZ offset LOW 40/80MHZ offset HIGH */
438 	/* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */
521 	/* No legacy device, but 20 MHz HT present */
666 #define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH		40
1225 	/* Channel Bonding state If 20/40 MHz is operational, this will
1226 	 * indicate the 40 MHz extension channel in combination with the
1373 	u32 mhz;  member
1480 	/* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
1501 	/* Short GI support for 40Mhz packets */
1504 	/* Short GI support for 20Mhz packets */
1545 	 * to HAL and HAL uses this flag to pickup up appropriate 40Mhz
1665 	/* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
1686 	/* Short GI support for 40Mhz packets */
1689 	/* Short GI support for 20Mhz packets */
1726 	 * to HAL and HAL uses this flag to pickup up appropriate 40Mhz
1937 	/* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */
2084 	/* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */