ath/ath12k/rx_desc.h

241  *		Field only valid when for the received frame type the corresponding
245  *		Field only valid when for the received frame type the corresponding
257  *		field in address search failure cache-only entry should
271  *		Supported only in full AP chips, not in client/soft
309  *		Field only valid when AST_based_lookup_valid == 1.
319  *		When set, all frames (data only ?) shall be encrypted. If
332  *		Field only valid when key_type is set to wep_varied_width.
340  *		Field only valid when bssid_hit is set.
345  *		Field only valid when mpdu_qos_control_valid is set
431  *		Field only valid when Mpdu_sequence_control_valid is set
441  *		Field only valid when Mpdu_frame_control_valid is set
446  *		Field only valid when Mpdu_frame_control_valid is set
451  *		Field only valid when Mpdu_frame_control_valid is set.
455  *		Field only valid when Mpdu_frame_control_valid is set.
456  *		Retry bit from the frame control.  Only valid when first_msdu is set
459  *		Field only valid when Mpdu_sequence_control_valid is set.
464  *		Field only valid when Frame_encryption_info_valid is set
474  *		reason only needs to evaluate this bit and non of the other ones
517  *		0.  The PPDU start status will only be valid when this bit
521  *		Multicast / broadcast indicator.  Only set when the MAC
523  *		matches one of the 4 BSSID registers. Only set when
527  *		Only valid when first_msdu is set. Indicates no AST matching
531  *		Only valid when first_msdu is set. Indicates an unsuccessful
535  *		Power management bit set in the 802.11 header.  Only set
539  *		Set if packet is not a non-QoS data frame.  Only set when
544  *		data format.  Only set when first_msdu is set.
547  *		Set if packet is a management packet.  Only set when
551  *		Set if packet is a control packet.  Only set when first_msdu
555  *		Set if more bit in frame control is set.  Only set when
560  *		control field is set.  Only set when first_msdu is set.
567  *		Set if the order bit in the frame control is set.  Only
587  *		Frame control field in header. Only valid when the field is marked valid.
590  *		Duration field in header. Only valid when the field is marked valid.
593  *		MAC addresses in the received frame. Only valid when corresponding
597  *		QoS/HT control fields from header. Valid only when corresponding fields
624  *		Multi-link receiver address1,2. Only valid when corresponding
892 /* These macro definitions are only used for WCN7850 */
971  *		MPDU length before decapsulation. Only valid when first_msdu is
1056  *		Field Only valid if da_is_valid is set. Indicates the DA address
1070  *		Indicates the last MSDU of the A-MSDU. MPDU end status is only
1122  *		or the fragment number is not zero.  Only set when first_msdu
1177  *		The key ID octet from the IV. Only valid when first_msdu is set.
1233  *		decapsulation. The latter is only valid if ipv4_proto or
1241  *		L4 offset in bytes from the start of RX_HEADER (only valid
1244  *		the start of the IP header after decapsulation (Only valid if
1277  *		Set if only the TCP Ack bit is set in the TCP flags and if
1334  *		Field only valid when pkt type is HT, VHT or HE. Values are
1349  *		Field only valid when
1408  *		0.  The PPDU start status will only be valid when this bit
1412  *		Multicast / broadcast indicator.  Only set when the MAC
1414  *		matches one of the 4 BSSID registers. Only set when
1418  *		Only valid when first_msdu is set. Indicates no AST matching
1422  *		Only valid when first_msdu is set. Indicates an unsuccessful
1426  *		Power management bit set in the 802.11 header.  Only set
1430  *		Set if packet is not a non-QoS data frame.  Only set when
1435  *		data format.  Only set when first_msdu is set.
1438  *		Set if packet is a management packet.  Only set when
1442  *		Set if packet is a control packet.  Only set when first_msdu
1446  *		Set if more bit in frame control is set.  Only set when
1451  *		control field is set.  Only set when first_msdu is set.
1459  *		Set if the order bit in the frame control is set.  Only