77 			ar5523_err(ar, "olen too small %d < %d\n",  in ar5523_read_reply()
102 			ar5523_err(ar, "RX USB error %d.\n", urb->status);  in ar5523_cmd_rx_cb()
107 		ar5523_err(ar, "RX USB too short.\n");  in ar5523_cmd_rx_cb()
121 			ar5523_err(ar, "Unexpected command id: %02x\n",  in ar5523_cmd_rx_cb()
153 			ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");  in ar5523_cmd_rx_cb()
157 			ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply");  in ar5523_cmd_rx_cb()
215 			ar5523_err(ar, "error %d when submitting rx urb\n",  in ar5523_submit_rx_cmd()
231 		ar5523_err(ar, "Failed to TX command. Status = %d\n",  in ar5523_cmd_tx_cb()
282 		ar5523_err(ar, "could not send command 0x%x, error=%d\n",  in ar5523_cmd()
290 		ar5523_err(ar, "timeout waiting for command %02x reply\n",  in ar5523_cmd()
323 		ar5523_err(ar, "could not write register 0x%02x\n", reg);  in ar5523_config()
341 		ar5523_err(ar, "could not write %d bytes to register 0x%02x\n",  in ar5523_config_multi()
356 		ar5523_err(ar, "could not read EEPROM offset 0x%02x\n", which);  in ar5523_get_status()
370 		ar5523_err(ar, "could not read capability %u\n", cap);  in ar5523_get_capability()
505 		ar5523_err(ar, "could not set chan, error %d\n", error);  in ar5523_switch_chan()
512 		ar5523_err(ar, "could not reset Tx queues, error %d\n",  in ar5523_switch_chan()
519 		ar5523_err(ar, "could not init wme, error %d\n", error);  in ar5523_switch_chan()
550 			ar5523_err(ar, "%s: USB err: %d\n", __func__,  in ar5523_data_rx_cb()
556 		ar5523_err(ar, "RX: wrong xfer size (usblen=%d)\n", usblen);  in ar5523_data_rx_cb()
648 			ar5523_err(ar, "could not allocate rx skbuff\n");  in ar5523_rx_refill_work()
665 				ar5523_err(ar, "Err sending rx data urb %d\n",  in ar5523_rx_refill_work()
880 			ar5523_err(ar, "error %d when submitting tx urb\n",  in ar5523_tx_work_locked()
920 	ar5523_err(ar, "TX queue stuck (tot %d pend %d)\n",  in ar5523_tx_wd_work()
924 	ar5523_err(ar, "Will restart dongle.\n");  in ar5523_tx_wd_work()
938 		ar5523_err(ar, "flush timeout (tot %d pend %d)\n",  in ar5523_flush_tx()
990 		ar5523_err(ar, "could not query stats, error %d\n", error);  in ar5523_stat_work()
1296 			ar5523_err(ar, "could not create connection\n");  in ar5523_bss_info_changed()
1302 			ar5523_err(ar, "could not set negotiated rate set\n");  in ar5523_bss_info_changed()
1308 			ar5523_err(ar, "could not set association\n");  in ar5523_bss_info_changed()
1399 		ar5523_err(ar, "could not read MAC address\n");  in ar5523_get_devstatus()
1408 		ar5523_err(ar, "could not read device serial number\n");  in ar5523_get_devstatus()
1425 		ar5523_err(ar, "could not read max RX size\n");  in ar5523_get_max_rxsz()
1432 		ar5523_err(ar, "Bad rxbufsz from device. Using %d instead\n",  in ar5523_get_max_rxsz()
1649 		ar5523_err(ar, "Could not create wq\n");  in ar5523_probe()
1655 		ar5523_err(ar, "Could not allocate rx buffers\n");  in ar5523_probe()
1661 		ar5523_err(ar, "Could not allocate rx command buffers\n");  in ar5523_probe()
1667 		ar5523_err(ar, "Could not allocate tx command buffers\n");  in ar5523_probe()
1673 		ar5523_err(ar, "Failed to submit rx cmd\n");  in ar5523_probe()
1682 		ar5523_err(ar, "could not initialize adapter\n");  in ar5523_probe()
1688 		ar5523_err(ar, "could not get caps from adapter\n");  in ar5523_probe()
1694 		ar5523_err(ar, "could not get caps from adapter\n");  in ar5523_probe()
1700 		ar5523_err(ar, "could not get device status\n");  in ar5523_probe()
1726 		ar5523_err(ar, "could not register device\n");  in ar5523_probe()