ethernet/sis/sis900.c

13    SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
15    SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
21    Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support
127 #define LAN	0x0002  macro
131 	{ "SiS 900 Internal MII PHY", 		0x001d, 0x8000, LAN },
132 	{ "SiS 7014 Physical Layer Solution", 	0x0016, 0xf830, LAN },
133 	{ "SiS 900 on Foxconn 661 7MI",         0x0143, 0xBC70, LAN },
134 	{ "Altimata AC101LF PHY",               0x0022, 0x5520, LAN },
135 	{ "ADM 7001 LAN PHY",			0x002e, 0xcc60, LAN },
136 	{ "AMD 79C901 10BASE-T PHY",  		0x0000, 0x6B70, LAN },
138 	{ "ICS LAN PHY",			0x0015, 0xF440, LAN },
139 	{ "ICS LAN PHY",			0x0143, 0xBC70, LAN },
142 	{ "Realtek RTL8201 PHY",		0x0000, 0x8200, LAN },
143 	{ "VIA 6103 PHY",			0x0101, 0x8f20, LAN },
370  *	LAN and 1394. When accessing EEPROM, send EEREQ signal to hardware first
372  *	by LAN, otherwise it is not. After MAC address is read from EEPROM, send
373  *	EEDONE signal to refuse EEPROM access by LAN.
576 	/* Detect Wake on Lan support */  in sis900_probe()
579 		printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);  in sis900_probe()
658 					    (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;  in sis900_mii_probe()
729  *	If HOME doesn't exist, select LAN.
753 			else if(phy->phy_types == LAN)  in sis900_default_phy()
1218  *	sis630_set_eq - set phy equalizer value for 630 LAN
1220  *	@revision: 630 LAN revision number
1384 	if (mii_phy->phy_types == LAN) {  in sis900_check_mode()
2082  *	sis900_set_wol - Set up Wake on Lan registers
2086  *	Process ethtool command "wol" to setup wake on lan features.
2104 			printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name);  in sis900_set_wol()
2123 		printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name);  in sis900_set_wol()