ethernet/sfc/mcdi_pcol.h

299 /* enum: V-adaptor not found. */
303 /* enum: V-switch not found. */
311 /* enum: Invalid v-switch type. */
313 /* enum: Invalid v-port type. */
7685 /* enum: 1.0v power: mV */
7687 /* enum: 1.2v power: mV */
7689 /* enum: 1.8v power: mV */
7691 /* enum: 2.5v power: mV */
7693 /* enum: 3.3v power: mV */
7695 /* enum: 12v power: mV */
7697 /* enum: 1.2v analogue power: mV */
7727 /* enum: 0.9v power voltage: mV */
7729 /* enum: 0.9v power current: mA */
7731 /* enum: 1.2v power current: mA */
7735 /* enum: 0.9v power voltage (at ADC): mV */
7741 /* enum: 0.9V voltage regulator temperature: degC */
7743 /* enum: 1.2V voltage regulator temperature: degC */
7769 /* enum: 0.9v power phase A voltage: mV */
7771 /* enum: 0.9v power phase A current: mA */
7773 /* enum: 0.9V voltage regulator phase A temperature: degC */
7775 /* enum: 0.9v power phase B voltage: mV */
7777 /* enum: 0.9v power phase B current: mA */
7779 /* enum: 0.9V voltage regulator phase B temperature: degC */
7833 /* enum: 1.8v power current: mA */
7835 /* enum: 2.5v power current: mA */
7837 /* enum: 3.3v power current: mA */
7839 /* enum: 12v power current: mA */
7841 /* enum: 1.3v power: mV */
7843 /* enum: 1.3v power current: mA */
8385 /* 0-8 low->high ref.V */
8391 /* 0-8 low->high ref.V */
10728 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
10833 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
10939 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
11074 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
11222 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
11372 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
11462 /* The port ID associated with the v-adaptor which should contain this DMAQ. */
11965 /* The port ID associated with the v-adaptor which should contain this filter.
12130 /* The port ID associated with the v-adaptor which should contain this filter.
12418 /* The port ID associated with the v-adaptor which should contain this filter.
18678  * allocate and initialise a v-switch.
18687 /* The port to connect to the v-switch's upstream port. */
18690 /* The type of v-switch to create. */
18703 /* Flags controlling v-port creation */
18709 /* The number of VLAN tags to allow for attached v-ports. For VLAN aggregators,
18710  * this must be one or greated, and the attached v-ports must have exactly this
18711  * number of tags. For other v-switch types, this must be zero of greater, and
18712  * is an upper limit on the number of VLAN tags for attached v-ports. An error
18714  * v-ports with this number of tags.
18725  * de-allocate a v-switch.
18734 /* The port to which the v-switch is connected. */
18744  * read some config of v-switch. For now this command is an empty placeholder.
18745  * It may be used to check if a v-switch is connected to a given EVB port (if
18755 /* The port to which the v-switch is connected. */
18765  * allocate a v-port.
18774 /* The port to which the v-switch is connected. */
18777 /* The type of the new v-port. */
18786 /* enum: A normal v-port receives packets which match a specified MAC and/or
18790 /* enum: An expansion v-port packets traffic which don't match any other
18791  * v-port.
18794 /* enum: An test v-port receives packets which match any filters installed by
18798 /* Flags controlling v-port creation */
18809  * v-switch.
18825 /* The handle of the new v-port */
18832  * de-allocate a v-port.
18841 /* The handle of the v-port */
18851  * allocate a v-adaptor.
18860 /* The port to connect to the v-adaptor's port. */
18863 /* Flags controlling v-adaptor creation */
18887 /* The MAC address to assign to this v-adaptor */
18899  * de-allocate a v-adaptor.
18908 /* The port to which the v-adaptor is connected. */
18918  * assign a new MAC address to a v-adaptor.
18927 /* The port to which the v-adaptor is connected. */
18930 /* The new MAC address to assign to this v-adaptor */
18940  * read the MAC address assigned to a v-adaptor.
18949 /* The port to which the v-adaptor is connected. */
18955 /* The MAC address assigned to this v-adaptor */
18962  * read some config of v-adaptor.
18971 /* The port to which the v-adaptor is connected. */
18980 /* The v-adaptor flags as defined at MC_CMD_VADAPTOR_ALLOC. */
19681  * Add a MAC address to a v-port
19690 /* The handle of the v-port */
19703  * Delete a MAC address from a v-port
19712 /* The handle of the v-port */
19725  * Delete a MAC address from a v-port
19734 /* The handle of the v-port */
19757  * Replace VLAN tags and/or MAC addresses of an existing v-port. If the v-port
19758  * has already been passed to another function (v-port's user), then that
19768 /* The handle of the v-port */
19782  * v-switch.
19814  * read some config of v-port.
19823 /* The handle of the v-port */
19832 /* The number of VLAN tags that may be used on a v-adaptor connected to this
21828 /* MAC address of v-adaptor associated with the client. If no such v-adapator
22052 /* enum: Per-v-adaptor enable for suppression of self-transmissions on the
26818 #define       MAE_FIELD_MASK_VALUE_PAIRS_ENC_VLAN1_TCI_BE_MASK_LBN 1616
27145 #define       MAE_FIELD_MASK_VALUE_PAIRS_V2_ENC_VLAN1_TCI_BE_MASK_LBN 1616