587 		DBG_PRINT(ERR_DBG,  in init_shared_mem()
602 			DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "  in init_shared_mem()
703 			DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "  in init_shared_mem()
1059 		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",  in s2io_print_pci_mode()
1094 	DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",  in s2io_print_pci_mode()
1204 		DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");  in init_nic()
1636 			DBG_PRINT(ERR_DBG,  in init_nic()
1715 				DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",  in init_nic()
2126 		DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");  in verify_xena_quiescence()
2130 		DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");  in verify_xena_quiescence()
2134 		DBG_PRINT(ERR_DBG, "PFC is not ready!\n");  in verify_xena_quiescence()
2138 		DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");  in verify_xena_quiescence()
2142 		DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");  in verify_xena_quiescence()
2146 		DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");  in verify_xena_quiescence()
2150 		DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");  in verify_xena_quiescence()
2154 		DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");  in verify_xena_quiescence()
2166 		DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");  in verify_xena_quiescence()
2171 		DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");  in verify_xena_quiescence()
2275 		DBG_PRINT(ERR_DBG, "%s: device is not ready, "  in start_nic()
2923 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",  in rx_intr_handler()
3054 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",  in tx_intr_handler()
3194 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3196 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3200 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3202 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3206 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3208 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3212 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3249 		DBG_PRINT(ERR_DBG,  in s2io_updt_xpak_counter()
3257 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "  in s2io_updt_xpak_counter()
3436 		DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);  in s2io_reset()
3553 			DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "  in s2io_set_swapper()
3586 			DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3647 		DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3670 		DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);  in wait_for_msix_trans()
3693 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in restore_xmsi_data()
3713 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in store_xmsi_data()
3787 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");  in s2io_enable_msi_x()
3832 		DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",  in s2io_test_msi()
3850 		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "  in s2io_test_msi()
3926 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_open()
3932 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");  in s2io_open()
4984 			DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5010 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5040 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5113 		DBG_PRINT(ERR_DBG,  in do_s2io_add_mc()
5164 	DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",  in do_s2io_delete_unicast_mc()
5252 		DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");  in do_s2io_prog_unicast()
5712 			DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");  in s2io_vpd_read()
5775 			DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");  in s2io_ethtool_geeprom()
5806 		DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5822 			DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5886 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);  in s2io_register_test()
5894 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);  in s2io_register_test()
5942 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "  in s2io_eeprom_test()
5964 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "  in s2io_eeprom_test()
6211 			DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",  in s2io_ethtool_test()
6646 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",  in s2io_change_mtu()
6714 				DBG_PRINT(ERR_DBG,  in s2io_set_link()
6916 		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);  in s2io_add_isr()
6959 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6971 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6975 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6995 			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",  in s2io_add_isr()
7068 			DBG_PRINT(ERR_DBG, "Device not Quiescent - "  in do_s2io_card_down()
7102 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_card_up()
7123 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",  in s2io_card_up()
7163 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);  in s2io_card_up()
7231 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);  in s2io_restart_nic()
7234 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);  in s2io_restart_nic()
7345 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",  in rx_osm_handler()
7424 					DBG_PRINT(ERR_DBG,  in rx_osm_handler()
7470 			DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);  in s2io_link()
7478 			DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);  in s2io_link()
7527 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "  in s2io_verify_parm()
7535 		DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);  in s2io_verify_parm()
7543 			DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7551 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7553 		DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");  in s2io_verify_parm()
7558 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7560 		DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",  in s2io_verify_parm()
7566 		DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "  in s2io_verify_parm()
7574 		DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "  in s2io_verify_parm()
7580 		DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");  in s2io_verify_parm()
7581 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");  in s2io_verify_parm()
7587 			DBG_PRINT(ERR_DBG, "Requested rx ring size not "  in s2io_verify_parm()
7681 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7694 		DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",  in s2io_init_nic()
7831 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);  in s2io_init_nic()
7838 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",  in s2io_init_nic()
7846 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",  in s2io_init_nic()
7874 		DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",  in s2io_init_nic()
7884 			DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",  in s2io_init_nic()
7902 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8012 		DBG_PRINT(ERR_DBG, "Device registration failed\n");  in s2io_init_nic()
8017 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");  in s2io_init_nic()
8018 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,  in s2io_init_nic()
8020 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,  in s2io_init_nic()
8022 	DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);  in s2io_init_nic()
8023 	DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);  in s2io_init_nic()
8034 		DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",  in s2io_init_nic()
8038 		DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",  in s2io_init_nic()
8045 		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);  in s2io_init_nic()
8048 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);  in s2io_init_nic()
8052 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,  in s2io_init_nic()
8055 	DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,  in s2io_init_nic()
8060 		DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);  in s2io_init_nic()
8063 		DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);  in s2io_init_nic()
8072 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",  in s2io_init_nic()
8075 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",  in s2io_init_nic()
8080 		DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",  in s2io_init_nic()
8084 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8089 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8094 	DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",  in s2io_init_nic()
8144 		DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");  in s2io_rem_nic()
8447 		DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);  in s2io_club_tcp_session()