microchip/vcap/vcap_ag_api.h

1 /* SPDX-License-Identifier: BSD-3-Clause */
6 /* This file is autogenerated by cml-utils 2023-03-13 10:16:42 +0100.
63  *   Used by 802.1BR Bridge Port Extension in an E-Tag
65  *   Used by 802.1BR Bridge Port Extension in an E-Tag
67  *   Set for frames containing an E-TAG (802.1BR Ethertype 893f)
69  *   E-Tag group bits in 802.1BR Bridge Port Extension
71  *   Used by 802.1BR Bridge Port Extension in an E-Tag
73  *   Used by 802.1BR Bridge Port Extension in an E-Tag
111  *   Set if frame has two or more Q-tags. Independent of port VLAN awareness
114  *   one or more Q-tags. Independent of port VLAN awareness
119  *   Used in interface map table
189  *   (FF-FF-FF-FF-FF-FF).
203  *   Payload bytes 0-1 after the frame's EtherType
211  *   Byte 0-7 of L2 payload after Type/Len field and overloading for OAM
215  *   SNAP header after LLC header (AA-AA-03)
223  *   Set if lookup is done for egress router leg
257  *   Bytes 0-6 after IP header
272  *   Sparx5: TCP/UDP destination port. Overloading for IP_7TUPLE: Non-TCP/UDP IP
278  *   frames: Payload bytes 0-7 after IP header. IPv4 options are not parsed so
306  *   Selects between entries relevant for first and second lookup. Set for first
307  *   lookup, cleared for second lookup.
309  *   Generic index - for chaining CLM instances
313  *   0: First lookup, 1: Second lookup, 2: Third lookup, Similar to VCAP_KF_FIRST
320  *   Dual-ended loss measurement counters in CCM frames are all zero
336  *   PDU type value (none, OAM CCM, MRP, DLR, RTE, IPv4, IPv6, OAM non-CCM)
342  *   Profinet or OPC-UA FrameId
344  *   Encoding of frame's EtherType: 0: Other, 1: Profinet, 2: OPC-UA, 3: Custom
347  *   Real-time VLAN index from ANA::RT_VLAN_PCP
357  *   Keyset type id - set by the API
517  *   Counter ID, used per lookup to index the 4K frame counters (ANA_ACL:CNT_TBL).
531  *   Enables use of custom keys in IS2. Bits 3:2 control second lookup in IS2
532  *   while bits 1:0 control first lookup. Encoding per lookup: 0: Disabled.  1:
547  *   0: No changes to port-based selection in ANA:PORT:OAM_CFG.DLR_ENA.  1: Enable
560  *   table 0, otherwise use DSCP_VAL. 5: Mapped using mapping table 1, otherwise
561  *   use mapping table 0. 6: Mapped using mapping table 2, otherwise use DSCP_VAL.
562  *   7: Mapped using mapping table 3, otherwise use mapping table 2
583  *   hit this action later are not copied to the CPU. To re-enable the HIT_ME_ONCE
614  *   Index for QoS mapping table lookup
616  *   Key type for QoS mapping table lookup. 0: DEI0, PCP0 (outer tag). 1: DEI1,
618  *   tag). 5: E-DEI, E-PCP (E-TAG). 6: DSCP if available, otherwise none. 7: DSCP
622  *   Selects which of the two QoS Mapping Table lookups that MAP_KEY and MAP_IDX
623  *   are applied to. 0: No changes to the QoS Mapping Table lookup. 1: Update key
624  *   type and index for QoS Mapping Table lookup #0. 2: Update key type and index
625  *   for QoS Mapping Table lookup #1. 3: Reserved.
630  *   forwarding (DMAC lookup), 3: Redirect. The CPU port is untouched by
646  *   is copy. 0: No mirroring. 1-3: Use mirror probe 0-2.
648  *   0: No changes to port-based selection in ANA:PORT:OAM_CFG.MRP_ENA.  1: Enable
651  *   Index used as part of key (field G_IDX) in the next lookup.
653  *   Controls the generation of the G_IDX used in the VCAP CLM next lookup
655  *   0: No changes to port-based selection in ANA:PORT:OAM_CFG.OAM_CFG 1: Enable
684  *   If set, POLICE_IDX is used to lookup ANA::POL.
693  *   by POLICE_IDX is active. Only applies to the second lookup.
695  *   Controls popping of Q-tags. The final number of Q-tags popped is calculated
702  *   3: Push tag C if UNTAG_VID_ENA = 0 or (C-TAG.VID ! = VID_C_VAL).
722  *   If set, SFID_VAL is used to lookup ANA::SFID.
726  *   If set, SGID_VAL is used to lookup ANA::SGID.
734  *   mapped to PCP (per port table). 3: DP.
737  *   mapped to PCP (per port table). 3: QoS class.
746  *   mapped to PCP (per port table). 3: DP.
749  *   mapped to PCP (per port table). 3: QoS class.
760  *   using mapping table 0, otherwise use DEI_C_VAL. 5: Mapped using mapping table
761  *   1, otherwise use mapping table 0. 6: Mapped using mapping table 2, otherwise
762  *   use DEI_C_VAL. 7: Mapped using mapping table 3, otherwise use mapping table
767  *   and tot_pop_cnt>0) else PCP_C_VAL. 4: Mapped using mapping table 0, otherwise
768  *   use PCP_C_VAL. 5: Mapped using mapping table 1, otherwise use mapping table
769  *   0. 6: Mapped using mapping table 2, otherwise use PCP_C_VAL. 7: Mapped using
770  *   mapping table 3, otherwise use mapping table 2.
775  *   Selects VID for ES0 tag C. The resulting VID is termed C-TAG.VID. 0:
778  *   Actionset type id - Set by the API