1093 		/* Switch to 10/100/1000 Mbps clock */  in lan743x_serdes_clock_and_aneg_update()
1159 		usleep_range(1000, 2000);  in lan743x_pcs_seq_state()
1173 	/* SGMII/1000/2500BASE-X PCS power down */  in lan743x_pcs_power_reset()
1187 	/* SGMII/1000/2500BASE-X PCS power up */  in lan743x_pcs_power_reset()
1276 				 1, 1000, 20000, 100);  in lan743x_mac_close()
1282 				 1, 1000, 20000, 100);  in lan743x_mac_close()
1316 					 1, 1000, 20000, 100);  in lan743x_mac_set_mtu()
1479 				 0, 1000, 20000, 100);  in lan743x_dmac_init()
1536 		usleep_range(1000, 20000);  in lan743x_dmac_tx_wait_till_stopped()
1565 		usleep_range(1000, 20000);  in lan743x_dmac_rx_wait_till_stopped()
2194 				 0, 1000, 20000, 100);  in lan743x_tx_close()
2219 				 0, 1000, 20000, 100);  in lan743x_tx_open()
2230 				 0, 1000, 20000, 100);  in lan743x_tx_open()
2737 				 0, 1000, 20000, 100);  in lan743x_rx_close()
2771 				 0, 1000, 20000, 100);  in lan743x_rx_open()
2854 				 0, 1000, 20000, 100);  in lan743x_rx_open()
2922 	/* LINK_STATUS_SOURCE from 1000BASE-X PCS link status */  in lan743x_phylink_1000basex_config()
2930 			  "error %d 1000basex aneg update failed\n", ret);  in lan743x_phylink_1000basex_config()
2962 			  "error %d 2500basex aneg update failed\n", ret);  in lan743x_phylink_2500basex_config()
2994 				  "2500BASEX config failed. Error %d\n", ret);  in lan743x_phylink_mac_config()
2997 				  "2500BASEX mode selected and configured\n");  in lan743x_phylink_mac_config()
3003 				  "1000BASEX config failed. Error %d\n", ret);  in lan743x_phylink_mac_config()
3006 				  "1000BASEX mode selected and configured\n");  in lan743x_phylink_mac_config()