mellanox/mlxsw/reg.h

88  * Note: Must be set for Spectrum.
320  * For Spectrum-2 when set_vid=0 and smpe_valid=1, the smpe will modify the vid.
334  * For Spectrum: use FID for both Dynamic and Static entries.
400  * For Spectrum-2 when set_vid=0 and smpe_valid=1, the smpe will modify the vid.
414  * For Spectrum: use FID for both Dynamic and Static entries.
459  * For Spectrum this value must be set to 0x1FFF
739  * Reserved on Spectrum.
815  * Reserved when SwitchX/-2 or Spectrum-1.
837  * Reserved when Spectrum-1.
847  * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2
1708  * Note: Reserved when SwitchX/-2 or Spectrum-1.
1767  * For Spectrum family, this affects the values of SPVM.i
1781  * For Spectrum family, this affects the values of SPVM.e,u,pt.
1952  * Note: Reserved when SwitchX/-2 and Spectrum-1.
1962  * Note: Reserved when SwitchX/-2 and Spectrum-1
1971  * Note: Reserved when SwitchX/-2 and Spectrum-1
1981  * Spectrum-1.
1991  * Spectrum-1.
2204  * Reserved on Spectrum-1.
2346  * Note: Reserved when legacy bridge model is used and on Spectrum-2.
2354  * Note: Reserved when legacy bridge model is used and on Spectrum-2.
2627  * Must be set to 1 for Spectrum.
2787  * For Spectrum and Spectrum-2, this is always type 2 - "flexible"
2794 	MLXSW_REG_PTAR_KEY_TYPE_FLEX2 = 0x51, /* Spectrum-2 */
2948  * For Spectrum, the index points to the KVD Linear.
3105  * This register is not supported by SwitchX/-2 and Spectrum.
3401  * A-TCAM. This register is not supported by SwitchX/-2 and Spectrum.
3434  * For Spectrum-2 range is 1..cap_kvd_size - 1
3492  * Note: In Spectrum-2, a region of 8 key blocks must be set to either
4145  * Supported only on Spectrum-1
4161  * Note: Used for max shaper configuration. For Spectrum, packets mode
4228  * For Spectrum-1: Range is: 5..25
4229  * For Spectrum-2: Range is: 11..25
4509  * Supported only on Spectrum-1.
5765  * Spectrum, as it maps untagged packets based on the default switch priority.
5858  * Note: In Spectrum, reserved for buffer[9].
5870  * Note: In Spectrum, reserved for buffer[9].
6532  * Note: Mirroring to a mirroring agent is only supported in Spectrum.
6837  * Reserved for SwitchX-2. For Spectrum, editing of interface properties
6919  * In Spectrum, all MAC addresses must have the same 38 MSBits.
6951  * Note: Reserved when legacy bridge model is used and on Spectrum-1.
7005 	/* IPinIP generic - used for Spectrum-2 underlay RIF */
7042  * Reserved for Spectrum-2.
7049  * Reserved for Spectrum.
7335 	 * Reserved for Spectrum.
7340 	 * Reserved for Spectrum.
7344 	 * Reserved for Spectrum.
7367  * For Spectrum, the index is to the KVD linear.
7440  * For Spectrum: Pointer to KVD linear space.
8088  * For Spectrum, pointer to KVD Linear.
8584  * For Spectrum, Index to KVD Linear.
8658  * pointer to the IPv6 DIP which is configured by RIPS. For Spectrum, the index
8728  * For Spectrum, the index is to the KVD linear.
8772  * Spectrum-1: 32-64, 512, 1024, 2048, 4096
8773  * Spectrum-2/3: 32-128, 256, 512, 1024, 2048, 4096
10106  * Reserved when Spectrum-1.
10388  * In Spectrum-2, the field is reversed, positive values mean to decrease the
10406  * Reserved on Spectrum-1.
10416  * Reserved on Spectrum-1.
10876  * Reserved when IB switches and when SwitchX/-2, Spectrum-2
10885  * Reserved when IB switches and when SwitchX/-2, Spectrum-2
10893  * Reserved when SwitchX/-2, Switch-IB/2, Spectrum-1 and Quantum.
10901  * Note: This register is not supported by current FW versions for Spectrum-1.
11005  * Reserved when Spectrum-2.
11044  * Reserved when Spectrum-2.
11114  * For Spectrum-1 the PLL clock is 156.25Mhz and PLL clock time is 6.4nSec.
12020  * Note: For Spectrum the NVE parsing must be enabled in MPRS.
12060 	/* Flow label is static. In Spectrum this means '0'. Spectrum-2
12084  * Reserved when nve_flh=1 and for Spectrum.
12098  * Spectrum uses LAG hash (SLCRv2). Spectrum-2 uses ECMP hash (RECRv2).
12135  * Reserved when Spectrum-2. See TNPC.
12142  * Reserved when Spectrum-2.
12149  * Reserved when Spectrum.
12161  * Underlay source IPv6 address of the NVE. For Spectrum, must not be
12215  * For Spectrum the index is to the KVD linear.
12411  * Reserved when Spectrum.
12972  * For Spectrum this is used for egress mirroring.