mellanox/mlxsw/pci_hw.h

1 /* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
2 /* Copyright (c) 2015-2018 Mellanox Technologies. All rights reserved */
79  * For Ethernet EMAD (Direct Route and non Direct Route) -
81  * For InfiniBand CTL - must be set if packet destination is local device
94  * Size of i-th scatter/gather entry, 0 if entry is unused.
99  * Physical address of i-th scatter/gather entry.
203  * 1 - Send Queue
204  * 0 - Receive Queue
220  * 0: uSec - 1.024uSec (default for devices which do not support
222  * 1: FRC - Free Running Clock - units of 1nSec
223  * 2: UTC - time_stamp[37:30] = Sec
224  *	  - time_stamp[29:0] = nSec
227  *   - time_stamp[37:30] = Sec
228  *   - time_stamp[29:0] = nSec
245  * The Tx port of a packet that is mirrored / sampled to the CPU is a LAG.
259  * The Tx LAG ID of the original packet that is mirrored / sampled to the CPU.
260  * Value of 0xFFFE means multi-port. Value fo 0xFFFF means that the Tx LAG ID
266  * The Tx port of the original packet that is mirrored / sampled to the CPU.
267  * Value of 0xFFFE means multi-port. Value fo 0xFFFF means that the Tx port is
308  * 0: uSec - 1.024uSec (default for devices which do not support
310  * 1: FRC - Free Running Clock - units of 1nSec
322  * 0: uSec - 1.024uSec (default for devices which do not support
324  * 1: FRC - Free Running Clock - units of 1nSec
325  * 2: UTC - time_stamp[37:30] = Sec
326  *	  - time_stamp[29:0] = nSec
329  *   - time_stamp[37:30] = Sec
330  *   - time_stamp[29:0] = nSec
361  * End-to-end latency of the original packet that does mirroring to the CPU.
397  * Command completion event - token
402  * Command completion event - status
407  * Command completion event - output parameter - higher part
412  * Command completion event - output parameter - lower part