38 	AQ_LINK_STAT	= 0xe800,
39 	AQ_IMASK_PMA	= 0xf000,
42 	AQ_XAUI_RX_CFG	= 0xc400,
43 	AQ_XAUI_TX_CFG	= 0xe400,
46 	AQ_1G_CTRL	= 0xc400,
47 	AQ_ANEG_STAT	= 0xc800,
50 	AQ_FW_VERSION	= 0x0020,
51 	AQ_IFLAG_GLOBAL	= 0xfc00,
52 	AQ_IMASK_GLOBAL	= 0xff00,
74 		CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",  in aq100x_reset()
92 	return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);  in aq100x_intr_disable()
102 	return 0;  in aq100x_intr_clear()
131 	err = aq100x_power_down(phy, 0);  in aq100x_autoneg_enable()
144 	err = aq100x_power_down(phy, 0);  in aq100x_autoneg_restart()
159 	adv = 0;  in aq100x_advertise()
168 	adv = 0;  in aq100x_advertise()
179 	adv = 0;  in aq100x_advertise()
189 				  0xfe0, adv);  in aq100x_advertise()
220 			return 0;  in aq100x_get_link_status()
228 		switch (v & 0x6) {  in aq100x_get_link_status()
229 		case 0x6:  in aq100x_get_link_status()
232 		case 0x4:  in aq100x_get_link_status()
235 		case 0x2:  in aq100x_get_link_status()
238 		case 0x0:  in aq100x_get_link_status()
247 	return 0;  in aq100x_get_link_status()
282 	t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);  in t3_aq100x_phy_prep()
293 		if (err || v == 0xffff) {  in t3_aq100x_phy_prep()
297 			CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",  in t3_aq100x_phy_prep()
307 		CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",  in t3_aq100x_phy_prep()
333 					  AQ_LOWPOWER, 0);  in t3_aq100x_phy_prep()
344 	v = v2 = 0;  in t3_aq100x_phy_prep()
347 	if (v != 0x1b || v2 != 0x1b)  in t3_aq100x_phy_prep()
349 			"PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",  in t3_aq100x_phy_prep()