broadcom/bnx2x/bnx2x_reg.h

259 /* [RC 1] Set when the message length mismatch (relative to last indication)
311 /* [RC 1] Set when the message length mismatch (relative to last indication)
336 /* [RC 1] Set when the message length mismatch (relative to last indication)
348 /* [RC 1] Set when the message length mismatch (relative to last indication)
359 /* [RC 1] Set when message length mismatch (relative to last indication) at
370 /* [RC 1] Set when the message length mismatch (relative to last indication)
429 /* [R 1] indication the initializing the activity counter by the hardware
435 /* [R 1] indication the initializing the cams by the hardware was done. */
472 /* [R 1] indication the initializing the link list by the hardware was done. */
671 /* [R 16] Valid sleeping threads indication have bit per thread */
1040    MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
1054    Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1055    mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1168    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1169    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1188    SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
1189    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1208    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1209    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1223    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1224    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1450    SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1486    Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1487    mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1527  * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication
1528  * is disabled. When 0 indicates that the PBF Request indication is enabled.
1530  * Request indication is disabled. When 0 indicates that the Tx Other Than
1531  * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1
1532  * indicates that the RX EEE LPI Status indication is disabled. When 0
1533  * indicates that the RX EEE LPI Status indication is enabled. In the EXIT
1536  * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause
1537  * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the
1538  * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY
1539  * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM
1540  * IDLE indication is disabled. When 0 indicates that the QM IDLE indication
1542  * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0
1543  * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1
1544  * Status Mask. When 1 indicates that the L1 Status indication from the PCIE
1545  * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication
1549  * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI
1550  * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1
1551  * indicates that the P0 EEE LPI REQ indication is disabled. When =0
1552  * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE
1553  * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is
1554  * disabled. When =0 indicates that the P0 EEE LPI REQ indication is
1556  * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
1557  * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1
1558  * REQ indication is disabled. When =0 indicates that the L1 indication is
1560  * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx
1562  * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This
1565  * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off).
1566  * When =0 indicates that the L1 Status Falling Edge Detect indication from
1579  * indication is disabled. When 0 indicates that the PBF Request indication
1581  * Than PBF Request indication is disabled. When 0 indicates that the Tx
1582  * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status
1583  * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled.
1584  * When 0 indicates that the RX LPI Status indication is enabled. In the
1587  * indicates that the Tx Pause indication is disabled. When 0 indicates that
1588  * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1
1589  * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates
1590  * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1
1591  * indicates that the QM IDLE indication is disabled. When 0 indicates that
1592  * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9]
1593  * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for
1594  * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for
1596  * Status indication from the PCIE CORE is disabled. When 0 indicates that
1597  * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the
1600  * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When
1601  * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1
1602  * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication
1603  * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is
1605  * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
1606  * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates
1607  * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that
1608  * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1
1609  * indicates that the L1 REQ indication is disabled. When =0 indicates that
1610  * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask.
1612  * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that
1613  * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE
1616  * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled
1618  * Detect indication from the PCIE CORE is enabled (L1 is on - off). This
2893 /* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */
3192 /* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
3197 /* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
3201 /* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
3206 /* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
3210 /* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
3215 /* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
3219 /* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
3224 /* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
3228 /* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
3233 /* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
3549 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
3550    indication about backpressure) */
3592 /* [R 1] Debug only: Indication if delivery ports are idle */
3886    threshold then has_payload indication will be asserted; the default value
3907    threshold then has_payload indication will be asserted; the default value
3916 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
4048    be use for the almost empty indication to the HW block; queues 31:0 */
4051    be use for the almost empty indication to the HW block; queues 95-64 */
4054    be use for the almost empty indication to the HW block; queues 63:32 */
4057    be use for the almost empty indication to the HW block; queues 127-96 */
4466 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
4515 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
4534 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
4543 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
4621 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
4632 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
4889 /* [R 8] Valid sleeping threads indication have bit per thread */
4986 /* [RC 1] Set when the message length mismatch (relative to last indication)
4997 /* [RC 1] Set when the message length mismatch (relative to last indication)
5054 /* [RC 1] Set when the message length mismatch (relative to last indication)
5083 /* [RC 1] Set when the message length mismatch (relative to last indication)
5151 /* [RC 1] Set when the message length mismatch (relative to last indication)
5162 /* [RC 1] Set when the message length mismatch (relative to last indication)
5381 /* [R 16] Valid sleeping threads indication have bit per thread */
5485 /* [RC 1] Set at message length mismatch (relative to last indication) at
5496 /* [RC 1] Set at message length mismatch (relative to last indication) at
5538 /* [RC 1] Set at message length mismatch (relative to last indication) at
5549 /* [RC 1] Set at message length mismatch (relative to last indication) at
5567 /* [RC 1] Set at message length mismatch (relative to last indication) at
5578 /* [RC 1] Set at message length mismatch (relative to last indication) at
5607 /* [RC 1] Set at message length mismatch (relative to last indication) at
5620 /* [RC 1] Message length mismatch (relative to last indication) at the usem
5703 /* [RC 1] Set at message length mismatch (relative to last indication) at
5935 /* [R 16] Valid sleeping threads indication have bit per thread */