Lines Matching full:checksum
56 * 13 : l3_csum_en - enable IPv4 header checksum.
57 * 14 : l4_csum_en - enable TCP/UDP checksum.
62 * 17 : l4_csum_partial - L4 partial checksum. when
63 * set to 0, the ENA calculates the L4 checksum,
68 * the checksum field of the L4 is used instead. When
69 * TSO enabled, the checksum of the pseudo-header
71 * checksum should be used for IPv6 packet that
204 * checksum error detected, or, the controller didn't
205 * validate the checksum. This bit is valid only when
208 * checksum error detected, or, the controller didn't
209 * validate the checksum. This bit is valid only when
214 * 16 : l4_csum_checked - L4 checksum was verified
216 * checksum is unknown
219 * 25 : l3_csum2 - second checksum engine result