Lines Matching +full:safeloader +full:- +full:partitions

1 # SPDX-License-Identifier: GPL-2.0-only
6 	  This provides partitions parser for devices based on BCM47xx
19 	tristate "Broadcom's U-Boot partition parser"
22 	  Broadcom uses a custom way of storing U-Boot environment variables.
23 	  They are placed inside U-Boot partition itself at unspecified offset.
44 	  <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
46 	  <mtd-id>  := unique id used in mapping driver/device
47 	  <size>    := standard linux memsize OR "-" to denote all
57 	  1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
58 	  mtdparts=sa1100:-
60 	  Same flash, but 2 named partitions, the first one being read-only:
61 	  mtdparts=sa1100:256k(ARMboot)ro,-(root)
80 	  This provides partitions parser for BCM4908 family devices
81 	  that can have multiple "firmware" partitions. It takes care of
89 	  This provides partitions parser for Linksys devices based on Broadcom
91 	  two "firmware" partitions. Currently used firmware has to be detected
95 	tristate "Parser for BCM963XX Image Tag format partitions"
101 	  and rootfs partitions.
103 	  header and creates up to two partitions, kernel and rootfs.
114 	  register MTD 'partitions' corresponding to each image detected,
122 	tristate "TP-Link Safeloader partitions parser"
125 	  TP-Link home routers use flash partitions to store various data. Info
126 	  about flash space layout is stored in a partitions table using a
127 	  custom ASCII-based format.
129 	  That format was first found in devices with SafeLoader bootloader and
130 	  was named after it. Later it was adapted to CFE and U-Boot
133 	  This driver reads partitions table, parses it and creates MTD
134 	  partitions.
137 	tristate "Parser for TRX format partitions"
141 	  may contain up to 3/4 partitions (depending on the version).
142 	  This driver will parse TRX header and report at least two partitions:
149 	  This provides the read-only FTL logic necessary to read the partition
163 	  MTD 'partitions' corresponding to each image in the table, enable
175 	default "-1"
186 	  For example "2" means block number 2, "-1" means the last
187 	  block and "-2" means the penultimate block.
196 	bool "Force read-only for RedBoot system images"
198 	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
207 	  This provides support for parsing partitions from Shared Memory (SMEM)
214 	  This provides partitions table parser for devices with Sercomm