Lines Matching refs:radio
12 Say Y here to enable selecting AM/FM radio adapters.
17 tristate "Guillemot MAXI Radio FM 2000 radio"
21 Choose Y here if you have this radio card. This card may also be
24 In order to control your radio card, you will need to use programs
30 module will be called radio-maxiradio.
36 Say Y here if you want to use the SAA7706H Car radio Digital
45 tristate "Griffin radioSHARK USB radio receiver"
49 Choose Y here if you have this radio receiver.
54 In order to control your radio card, you will need to use programs
60 module will be called radio-shark.
63 tristate "Griffin radioSHARK2 USB radio receiver"
66 Choose Y here if you have this radio receiver.
71 In order to control your radio card, you will need to use programs
77 module will be called radio-shark2.
89 Choose Y here if you have this FM radio chip.
91 In order to control your radio card, you will need to use programs
97 module will be called radio-si476x.
103 tristate "TEA5764 I2C FM radio support"
111 module will be called radio-tea5764.
134 tristate "Enable the Timberdale radio driver"
151 Choose Y here if you have this FM radio chip.
153 In order to control your radio card, you will need to use programs
159 module will be called radio-wl1273.
162 tristate "D-Link/GemTek USB FM radio support"
165 Say Y here if you want to connect this type of radio to your
181 module will be called radio-keene.
184 tristate "Masterkit MA901 USB FM radio support"
187 Say Y here if you want to connect this type of radio to your
193 module will be called radio-ma901.
196 tristate "AverMedia MR 800 USB FM radio support"
199 Say Y here if you want to connect this type of radio to your
205 module will be called radio-mr800.
208 tristate "Thanko's Raremono AM/FM/SW radio support"
212 It is one of the very few or perhaps the only consumer USB radio device
219 module will be called radio-raremono.
221 source "drivers/media/radio/si470x/Kconfig"
222 source "drivers/media/radio/si4713/Kconfig"
224 # TI's ST based wl128x FM radio
226 source "drivers/media/radio/wl128x/Kconfig"
233 bool "ISA radio devices"
247 Choose Y here if you have one of these FM radio cards, and then fill
251 module will be called radio-aztech.
267 Choose Y here if you have one of these AM/FM radio cards, and then
271 module will be called radio-cadet.
279 Choose Y here if you have this FM radio card, and then fill in the
288 module will be called radio-gemtek.
320 tristate "miroSOUND PCM20 radio"
326 Choose Y here if you have this FM radio card. You also need to enable
329 is required for the radio-miropcm20.
332 module will be called radio-miropcm20.
340 Choose Y here if you have one of these FM radio cards, and then fill
347 If you have a GemTeks combined (PnP) sound- and radio card you must
356 module will be called radio-aimslab.
363 Choose Y here if you have this FM radio card, and then fill in the
371 module will be called radio-rtrack2.
394 Choose Y here if you have one of these FM radio cards.
397 module will be called radio-sf16fmi.
405 Choose Y here if you have one of these FM radio cards.
408 module will be called radio-sf16fmr2.
416 Choose Y here if you have this FM radio card.
423 module will be called radio-terratec.
426 tristate "Trust FM radio card"
431 This is a driver for the Trust FM radio cards. Say Y if you have
439 module will be called radio-trust.
446 Enter the I/O port of your Trust FM radio card. If unsure, try the
455 Choose Y here if you have one of these FM radio cards, and then fill
463 module will be called radio-typhoon.
470 Enter the frequency used for muting the radio. The device is never
473 radio device is set to the frequency you can enter here whenever
474 the device is muted. There should be no local radio station at that
482 Enter the I/O port of your Typhoon or EcoRadio radio card.
490 Choose Y here if you have one of these FM radio cards, and then fill
498 module will be called radio-zoltrix.
505 Enter the I/O port of your Zoltrix radio card.