Lines Matching full:stereo
314 * right now it is used only to check the audio mode (mono/stereo/whatever)
315 * some time after switching to another TV channel, then turn on stereo
410 #define TDA9840_ST_STEREO 0x40 /* Stereo sound identified */
524 /* lower 4 bits control stereo noise threshold, over which stereo turns off
549 #define TDA985x_STEREO 1<<6 /* Selects Stereo output, mono if not received */
556 #define TDA9855_LINEAR 0 /* Linear Stereo */
557 #define TDA9855_PSEUDO 1 /* Pseudo Stereo */
558 #define TDA9855_SPAT_30 2 /* Spatial Stereo, 30% anti-phase crosstalk */
559 #define TDA9855_SPAT_50 3 /* Spatial Stereo, 52% anti-phase crosstalk */
571 #define TDA985x_STP 1<<5 /* Stereo Pilot/detect (read-only) */
573 #define TDA985x_STS 1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/
579 #define TDA985x_ADJ 1<<7 /* Stereo adjust on/off (wideband and spectral */
589 /* Add mono mode regardless of SAP and stereo */ in tda985x_getrxsubchans()
644 * 1, 0 external stereo
655 * 1, 0, 0 Stereo
656 * 1, 1, 1 Stereo (reversed channel)
683 /* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB)
730 * 0 1 0 1 mono (from stereo decoder)
745 #define TDA9873_STEREO 2 /* Stereo sound is identified */
848 #define TDA9874A_SDACOSR 0x13 /* stereo DAC output select */
936 /* Then the sound would remain stereo, but won't be so clear. */ in tda9874a_setup()
983 * error count. So in fact there is no stereo in this case :-( in tda9874a_getrxsubchans()
1067 fmmr = (tda9874a_ESP == 1) ? 0x05 : 0x04; /* stereo */ in tda9874a_setaudmode()
1268 #define TEA6300_S_SA 0x01 /* stereo A input */
1269 #define TEA6300_S_SB 0x02 /* stereo B */
1270 #define TEA6300_S_SC 0x04 /* stereo C */
1282 #define TEA6320_S_SA 0x07 /* stereo A input */
1283 #define TEA6320_S_SB 0x06 /* stereo B */
1284 #define TEA6320_S_SC 0x05 /* stereo C */
1285 #define TEA6320_S_SD 0x04 /* stereo D */
1288 #define TEA6420_S_SA 0x00 /* stereo A input */
1289 #define TEA6420_S_SB 0x01 /* stereo B */
1290 #define TEA6420_S_SC 0x02 /* stereo C */
1291 #define TEA6420_S_SD 0x03 /* stereo D */
1292 #define TEA6420_S_SE 0x04 /* stereo E */
1323 #define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */
1324 #define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */
1326 #define TDA8425_S1_STEREO 0x18 /* stereo bits */
1327 #define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */
1328 #define TDA8425_S1_STEREO_LINEAR 0x08 /* linear stereo */
1329 #define TDA8425_S1_STEREO_PSEUDO 0x10 /* pseudo stereo */
1334 #define TDA8425_S1_ML_STEREO 0x06 /* stereo */
1417 * stereo L L
1875 automatically follows the stereo carrier, a kthread is in tvaudio_s_frequency()