239 	 * calculated  above and total rail current divided by number phases.  in mp2975_read_phase()
567 	 * Identify multiphase for rail 2 - could be from 0 to data->max_phases[1].  in mp2975_identify_multiphase_rail2()
595 	/* Set phases for rail 2 from upper to lower. */  in mp2975_set_phase_rail2()
610 	/* Identify multiphase for rail 1 - could be from 1 to data->max_phases[0]. */  in mp2975_identify_multiphase()
619 	 * to different phase count applications for rail 1 and rail 2.  in mp2975_identify_multiphase()
620 	 * Rail 1 can be set to $n phases, while rail 2 can be set to less than  in mp2975_identify_multiphase()
621 	 * that. When rail 1’s phase count is configured as 0, rail  in mp2975_identify_multiphase()
622 	 * 1 operates with 1-phase DCM. When rail 2 phase count is configured  in mp2975_identify_multiphase()
623 	 * as 0, rail 2 is disabled.  in mp2975_identify_multiphase()
675 	/* Identify VID mode for rail 1. */  in mp2975_identify_rails_vid()
682 	/* Identify VID mode for rail 2, if connected. */  in mp2975_identify_rails_vid()
702 	/* Identify VID mode for rail 1. */  in mp2973_identify_rails_vid()
710 	/* Identify VID mode for rail 2, if connected. */  in mp2973_identify_rails_vid()
770 	/* Get voltage reference value for rail 1. */  in mp2975_vref_get()
777 	/* Get voltage reference value for rail 2, if connected. */  in mp2975_vref_get()
1020 	/* Identify multiphase configuration for rail 2. */  in mp2975_probe()
1040 		/* Identify VID setting per rail. */  in mp2975_probe()
1060 		/* Identify VID setting per rail. */  in mp2975_probe()