Lines Matching +full:ls2k1000 +full:- +full:gpio

1 /* SPDX-License-Identifier: GPL-2.0+ */
164  * In gross, LSDC_CRTC1_XXX_REG - LSDC_CRTC0_XXX_REG = 0x10, but not all of
173  * There is only one hardware cursor unit in LS7A1000 and LS2K1000, let
187  * LS7A1000 and LS2K1000 only support 32x32, LS2K2000 and LS7A2000 support
228  * FBRF0: CRTC-0 reading from its framebuffer finished.
229  * FBRF1: CRTC-1 reading from its framebuffer finished.
231  * +-------+--------------------------+-------+--------+--------+-------+
233  * +-------+--------------------------+-------+--------+--------+-------+
235  * +-------+--------------------------+-------+--------+--------+-------+
237  * +-------+-------+-------+------+--------+--------+--------+--------+
239  * +-------+-------+-------+------+--------+--------+--------+--------+
241  * +-------+-------+-------+------+--------+--------+--------+--------+
278  * register, Those GPIOs has no relationship whth the GPIO hardware on the
281  * LS2k1000 don't have those registers, they use hardware i2c or general GPIO
284  * GPIO data register, address offset: 0x1650
285  *   +---------------+-----------+-----------+
287  *   +---------------+-----------+-----------+
289  *   +      N/A      +-----------+-----------+
291  *   +---------------+-----------+-----------+
296  *  GPIO Input/Output direction control register, address offset: 0x1660
301  *  LS7A2000 has two built-in HDMI Encoder and one VGA encoder
328 /* 1: hw i2c, 0: gpio emu i2c, shouldn't put in LSDC_HDMIx_INTF_CTRL_REG */