1 // SPDX-License-Identifier: GPL-2.0+
3  * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
19  * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
34 	{0x00, 0x30, 0x40},	/* USE_SEL[1-3] offsets */
35 	{0x04, 0x34, 0x44},	/* IO_SEL[1-3] offsets */
36 	{0x0c, 0x38, 0x48},	/* LVL[1-3] offsets */
54 #define ICHX_WRITE(val, reg, base_res)	outl(val, (reg) + (base_res)->start)
55 #define ICHX_READ(reg, base_res)	inl((reg) + (base_res)->start)
91 	struct ichx_desc *desc;	/* Pointer to chipset-specific description */
97 static int modparam_gpiobase = -1;	/* dynamic */
99 MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
110 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)  in ichx_write_bit()
113 		data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],  in ichx_write_bit()
120 	ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr],  in ichx_write_bit()
122 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)  in ichx_write_bit()
125 	tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],  in ichx_write_bit()
130 	return (verify && data != tmp) ? -EPERM : 0;  in ichx_write_bit()
142 	data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],  in ichx_read_bit()
145 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)  in ichx_read_bit()
170 	 * are output-only.  in ichx_gpio_direction_input()
178 	/* Disable blink hardware which is available for GPIOs from 0 to 31. */  in ichx_gpio_direction_output()
179 	if (nr < 32 && ichx_priv.desc->have_blink)  in ichx_gpio_direction_output()
187 	 * are input-only.  in ichx_gpio_direction_output()
203 	 * GPI 0 - 15 need to be read from the power management registers on  in ich6_gpio_get()
208 			return -ENXIO;  in ich6_gpio_get()
212 		/* GPI 0 - 15 are latched, write 1 to clear*/  in ich6_gpio_get()
227 		return -ENXIO;  in ichx_gpio_request()
235 	if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f))  in ichx_gpio_request()
238 	return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;  in ichx_gpio_request()
250 		nr -= 16;  in ich6_gpio_request()
262 	chip->owner = THIS_MODULE;  in ichx_gpiolib_setup()
263 	chip->label = DRV_NAME;  in ichx_gpiolib_setup()
264 	chip->parent = ichx_priv.dev;  in ichx_gpiolib_setup()
266 	/* Allow chip-specific overrides of request()/get() */  in ichx_gpiolib_setup()
267 	chip->request = ichx_priv.desc->request ?  in ichx_gpiolib_setup()
268 		ichx_priv.desc->request : ichx_gpio_request;  in ichx_gpiolib_setup()
269 	chip->get = ichx_priv.desc->get ?  in ichx_gpiolib_setup()
270 		ichx_priv.desc->get : ichx_gpio_get;  in ichx_gpiolib_setup()
272 	chip->set = ichx_gpio_set;  in ichx_gpiolib_setup()
273 	chip->get_direction = ichx_gpio_get_direction;  in ichx_gpiolib_setup()
274 	chip->direction_input = ichx_gpio_direction_input;  in ichx_gpiolib_setup()
275 	chip->direction_output = ichx_gpio_direction_output;  in ichx_gpiolib_setup()
276 	chip->base = modparam_gpiobase;  in ichx_gpiolib_setup()
277 	chip->ngpio = ichx_priv.desc->ngpio;  in ichx_gpiolib_setup()
278 	chip->can_sleep = false;  in ichx_gpiolib_setup()
279 	chip->dbg_show = NULL;  in ichx_gpiolib_setup()
282 /* ICH6-based, 631xesb-based */
284 	/* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
288 	/* GPIO 0-15 are read in the GPE0_STS PM register */
306 	/* The 3100 needs fixups for GPIO 0 - 17 */
310 	/* GPIO 0-15 are read in the GPE0_STS PM register */
318 /* ICH7 and ICH8-based */
326 /* ICH9-based */
334 /* ICH10-based - Consumer/corporate versions have different amount of GPIO */
357 	/* Avoton has only 59 GPIOs, but we assume the first set of register
358 	 * (Core) has 32 instead of 31 to keep gpio-ich compliance
371 	if (!res_base || !res_base->start || !res_base->end)  in ichx_gpio_request_regions()
372 		return -ENODEV;  in ichx_gpio_request_regions()
374 	for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {  in ichx_gpio_request_regions()
378 				res_base->start + ichx_priv.desc->regs[0][i],  in ichx_gpio_request_regions()
379 				ichx_priv.desc->reglen[i], name))  in ichx_gpio_request_regions()
380 			return -EBUSY;  in ichx_gpio_request_regions()
387 	struct device *dev = &pdev->dev;  in ichx_gpio_probe()
393 		return -ENODEV;  in ichx_gpio_probe()
395 	switch (ich_info->gpio_version) {  in ichx_gpio_probe()
421 		return -ENODEV;  in ichx_gpio_probe()
428 	err = ichx_gpio_request_regions(dev, res_base, pdev->name,  in ichx_gpio_probe()
429 					ich_info->use_gpio);  in ichx_gpio_probe()
434 	ichx_priv.use_gpio = ich_info->use_gpio;  in ichx_gpio_probe()
439 	 * 0 - 15 on some chipsets.  in ichx_gpio_probe()
441 	if (!ichx_priv.desc->uses_gpe0)  in ichx_gpio_probe()
446 		dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");  in ichx_gpio_probe()
450 	if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),  in ichx_gpio_probe()
451 				 pdev->name)) {  in ichx_gpio_probe()
452 		dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");  in ichx_gpio_probe()
462 		dev_err(dev, "Failed to register GPIOs\n");  in ichx_gpio_probe()
467 		 ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);  in ichx_gpio_probe()
481 MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");