Lines Matching +full:set +full:- +full:of +full:- +full:ports
1 // SPDX-License-Identifier: GPL-2.0+
11 * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
21 static unsigned int ports[SI_MAX_PARMS]; variable
36 …s the type of each interface, each interface separated by commas. The types are 'kcs', 'smic', an…
39 …ts the memory address of each interface, the addresses separated by commas. Only use if an interf…
40 module_param_hw_array(ports, uint, ioport, &num_ports, 0);
41 MODULE_PARM_DESC(ports,
42 …"Sets the port address of each interface, the addresses separated by commas. Only use if an inter…
45 …"Sets the interrupt of each interface, the addresses separated by commas. Only use if an interfac…
48 …"The number of bytes between the start address and each successive register used by the interface.…
51 …of the specific IPMI register in bytes. This should generally be 1, 2, 4, or 8 for an 8-bit, 16-bi…
54 …r, in bits. For instance, if the data is read from a 32-bit word and the IPMI data is in bit 8-15…
57 …"Set the default IPMB slave address for the controller. Normally this is 0x20, but can be overrid…
73 t = match_string(si_to_str, -1, si_type_str); in ipmi_hardcode_init_one()
90 ipmi_platform_add("hardcode-ipmi-si", i, &p); in ipmi_hardcode_init_one()
117 if (i < num_ports && ports[i]) in ipmi_hardcode_init()
118 ipmi_hardcode_init_one(si_type[i], i, ports[i], in ipmi_hardcode_init()
129 ipmi_remove_platform_device_by_name("hardcode-ipmi-si"); in ipmi_si_hardcode_exit()
133 * Returns true of the given address exists as a hardcoded address,
142 if (ports[i] == addr) in ipmi_si_hardcode_match()