79 	 * fully operational, but have the danger of duplicate addresses  in btintel_check_bdaddr()
589 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
601 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
1134 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_firmware()
1135 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_firmware()
1139 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_firmware()
1173 	 * mode or is running operational firmware. The value 0x01 identifies  in btintel_download_fw_tlv()
1174 	 * the bootloader and the value 0x03 identifies the operational  in btintel_download_fw_tlv()
1178 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_fw_tlv()
1861 	 * is done by the operational firmware sending bootup notification.  in btintel_boot()
1863 	 * Booting into operational firmware should not take longer than  in btintel_boot()
1918 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_fw()
1919 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_fw()
1922 	 * When the operational firmware is already present, then only  in btintel_download_fw()
1965 	 * also be no valid address for the operational firmware.  in btintel_download_fw()
2049 	/* Before switching the device into operational mode and with that  in btintel_download_fw()
2092 	/* controller is already having an operational firmware */  in btintel_bootloader_setup()
2108 		/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup()
2214 	 * mode or is running operational firmware. The value 0x03 identifies  in btintel_prepare_fw_download_tlv()
2215 	 * the bootloader and the value 0x23 identifies the operational  in btintel_prepare_fw_download_tlv()
2218 	 * When the operational firmware is already present, then only  in btintel_prepare_fw_download_tlv()
2301 	/* Before switching the device into operational mode and with that  in btintel_prepare_fw_download_tlv()
2758 	/* check if controller is already having an operational firmware */  in btintel_bootloader_setup_tlv()
2793 	/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup_tlv()
3113 	 * to bootloader mode and are not populated in operational mode  in btintel_setup_combined()
3143 		 * the operational firmware supports both old and TLV based  in btintel_setup_combined()
3318 				/* When switching to the operational firmware  in btintel_recv_event()