base/power/wakeirq.c

17  * Internal function to attach a dedicated wake-up interrupt as a wake IRQ.
46  * automatically configured for wake-up from suspend  based
107  * handle_threaded_wake_irq - Handler for dedicated wake-up interrupts
108  * @irq: Device specific dedicated wake-up interrupt
111  * Some devices have a separate wake-up interrupt in addition to the
112  * device IO interrupt. The wake-up interrupt signals that a device
113  * should be woken up from it's idle state. This handler uses device
115  * up to the device to do whatever it needs to. Note that as the
116  * device may need to restore context and start up regulators, we
120  * We assume that the wake-up interrupt just needs to wake-up the
170 	 * Consumer device may need to power up and restore state  in __dev_pm_set_dedicated_wake_irq()
198  * dev_pm_set_dedicated_wake_irq - Request a dedicated wake-up interrupt
200  * @irq: Device wake-up interrupt
202  * Unless your hardware has separate wake-up interrupts in addition
205  * Sets up a threaded interrupt handler for a device that has
206  * a dedicated wake-up interrupt in addition to the device IO
216  * dev_pm_set_dedicated_wake_irq_reverse - Request a dedicated wake-up interrupt
219  * @irq: Device wake-up interrupt
221  * Unless your hardware has separate wake-up interrupts in addition
224  * Sets up a threaded interrupt handler for a device that has a dedicated
225  * wake-up interrupt in addition to the device IO interrupt. It sets
227  * to enable dedicated wake-up interrupt after running the runtime suspend
237  * dev_pm_enable_wake_irq_check - Checks and enables wake-up interrupt
239  * @can_change_status: Can change wake-up interrupt status
241  * Enables wakeirq conditionally. We need to enable wake-up interrupt
244  * otherwise try to disable already disabled wakeirq. The wake-up interrupt
275  * dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt
279  * Disables wake-up interrupt conditionally based on status.
323  * dev_pm_arm_wake_irq - Arm device wake-up
324  * @wirq: Device wake-up interrupt
326  * Sets up the wake-up event conditionally based on the
344  * dev_pm_disarm_wake_irq - Disarm device wake-up
345  * @wirq: Device wake-up interrupt
347  * Clears up the wake-up event conditionally based on the