Lines Matching full:parallel

63 	tristate "Parallel port LCD/Keypad Panel support"
68 	  parallel port. This driver also features 4 and 6-key keypads. The LCD
77 	int "Default parallel port number (0=LPT1)"
81 	  This is the index of the parallel port the panel is connected to. One
82 	  driver instance only supports one parallel port, so if your keypad
98 	    1 = 2x16 parallel LCD, old keypad
100 	    3 = 2x16 parallel LCD (Hantronix), no keypad
101 	    4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
102 	    5 = 2x40 parallel LCD (old one), with old keypad
105 	  wired to the parallel port, and how it works. This is only intended
114 	  This enables and configures a keypad connected to the parallel port.
131 	   This enables and configures an LCD connected to the parallel port.
139 	     2 : 2x16 & 2x40 parallel LCD (old wiring)
141 	     4 : 2x16 parallel LCD (Hantronix wiring)
142 	     5 : 2x16 parallel LCD (Nexcom wiring)
175 	  and is the case for most parallel LCDs. Other LCDs, and some serial ones,
214 	int "LCD communication mode (0=parallel 8 bits, 1=serial)"
218 	  This driver now supports any serial or parallel LCD wired to a parallel
220 	  be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
221 	  (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
223 	  parallel LCD, and 1 for a serial LCD.
227 	int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
231 	  This describes the number of the parallel port pin to which the LCD 'E'
242 	int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
246 	  This describes the number of the parallel port pin to which the LCD 'RS'
257 	int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
261 	  This describes the number of the parallel port pin to which the LCD 'RW'
272 	int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
276 	  This describes the number of the parallel port pin to which the serial
287 	int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
291 	  This describes the number of the parallel port pin to which the serial
302 	int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
306 	  This describes the number of the parallel port pin to which the LCD 'BL' signal
379 	  Depends on Parallel Port support. If you say Y at
389 	hex "Parallel port where the LCD is connected"
393 	  The address of the parallel port where the LCD is connected.
395 	  The first  standard parallel port address is 0x378.
396 	  The second standard parallel port address is 0x278.
397 	  The third  standard parallel port address is 0x3BC.
403 	  many parallel ports are present and which address each one has.
416 	  to the parallel port.
435 	  For help about how to wire your LCD to the parallel port,
547 	tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)"