boards/mach-migor/setup.c

1 // SPDX-License-Identifier: GPL-2.0
3  * Renesas System Solutions Asia Pte. Ltd - Migo-R
8 #include <linux/dma-map-ops.h>
19 #include <linux/i2c.h>
30 #include <media/drv-intf/renesas-ceu.h>
31 #include <media/i2c/ov772x.h>
32 #include <media/i2c/tw9910.h>
78 	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
118 		.mask_flags = MTD_WRITEABLE,	/* Read-only */
148 	.name		= "physmap-flash",
176 		writeb(cmd, chip->legacy.IO_ADDR_W + 0x00400000);  in migor_nand_flash_cmd_ctl()
178 		writeb(cmd, chip->legacy.IO_ADDR_W + 0x00800000);  in migor_nand_flash_cmd_ctl()
180 		writeb(cmd, chip->legacy.IO_ADDR_W);  in migor_nand_flash_cmd_ctl()
286 		.start	= 0xfe940000, /* P4-only space */
339 	.name		= "renesas-ceu",
350 	.dev_id		= "0-0021",
359 	.dev_id		= "0-0045",
449 	/* register board specific self-refresh code */  in migor_devices_setup()
456 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,  in migor_devices_setup()
465 	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */  in migor_devices_setup()
502 #ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */  in migor_devices_setup()
526 #ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */  in migor_devices_setup()
568 	__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */  in migor_devices_setup()
593 	/* Add a clock alias for ov7725 xclk source. */  in migor_devices_setup()
594 	clk_add_alias(NULL, "0-0021", "video_clk", NULL);  in migor_devices_setup()
619 	 * MD3=0: 16-bit Area0 Bus Width  in migor_mode_pins()
646 	.mv_name		= "Migo-R",