dts/allwinner/sun20i-d1-mangopi-mq-pro.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/leds/common.h>
7 /dts-v1/;
9 #include "sun20i-d1.dtsi"
10 #include "sun20i-common-regulators.dtsi"
14 	compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
22 		stdout-path = "serial0:115200n8";
26 		compatible = "gpio-leds";
28 		led-0 {
36 		compatible = "regulator-fixed";
37 		regulator-name = "avdd2v8";
38 		regulator-min-microvolt = <2800000>;
39 		regulator-max-microvolt = <2800000>;
40 		vin-supply = <&reg_vcc_3v3>;
44 		compatible = "regulator-fixed";
45 		regulator-name = "dvdd";
46 		regulator-min-microvolt = <1200000>;
47 		regulator-max-microvolt = <1200000>;
48 		vin-supply = <&reg_vcc_3v3>;
51 	reg_vdd_cpu: vdd-cpu {
52 		compatible = "regulator-fixed";
53 		regulator-name = "vdd-cpu";
54 		regulator-min-microvolt = <1100000>;
55 		regulator-max-microvolt = <1100000>;
56 		vin-supply = <&reg_vcc>;
59 	wifi_pwrseq: wifi-pwrseq {
60 		compatible = "mmc-pwrseq-simple";
61 		reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
66 	cpu-supply = <&reg_vdd_cpu>;
70 	clock-frequency = <24000000>;
78 	bus-width = <4>;
79 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
80 	disable-wp;
81 	vmmc-supply = <&reg_vcc_3v3>;
82 	vqmmc-supply = <&reg_vcc_3v3>;
83 	pinctrl-0 = <&mmc0_pins>;
84 	pinctrl-names = "default";
89 	bus-width = <4>;
90 	mmc-pwrseq = <&wifi_pwrseq>;
91 	non-removable;
92 	vmmc-supply = <&reg_vcc_3v3>;
93 	vqmmc-supply = <&reg_vcc_3v3>;
94 	pinctrl-0 = <&mmc1_pins>;
95 	pinctrl-names = "default";
100 		interrupt-parent = <&pio>;
102 		interrupt-names = "host-wake";
111 	vcc-pe-supply = <&reg_avdd2v8>;
115 	pinctrl-0 = <&uart0_pb8_pins>;
116 	pinctrl-names = "default";
121 	uart-has-rtscts;
122 	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
123 	pinctrl-names = "default";
127 		compatible = "realtek,rtl8723ds-bt";
128 		device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
129 		enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
130 		host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
140 	usb1_vbus-supply = <&reg_vcc>;