dts/fsl/p1022ds.dtsi

2  * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
37 		#address-cells = <1>;
38 		#size-cells = <1>;
39 		compatible = "cfi-flash";
41 		bank-width = <2>;
42 		device-width = <1>;
44 		partition@0 {
46 			label = "ramdisk-nor";
47 			read-only;
50 		partition@3000000 {
52 			label = "diagnostic-nor";
53 			read-only;
56 		partition@3e00000 {
58 			label = "dink-nor";
59 			read-only;
62 		partition@4000000 {
64 			label = "kernel-nor";
65 			read-only;
68 		partition@4400000 {
70 			label = "jffs2-nor";
73 		partition@7f00000 {
75 			label = "dtb-nor";
76 			read-only;
79 		partition@7f80000 {
81 			label = "u-boot-nor";
82 			read-only;
87 		#address-cells = <1>;
88 		#size-cells = <1>;
89 		compatible = "fsl,elbc-fcm-nand";
92 		partition@0 {
94 			label = "u-boot-nand";
95 			read-only;
98 		partition@2000000 {
100 			label = "jffs2-nand";
103 		partition@12000000 {
105 			label = "ramdisk-nand";
106 			read-only;
109 		partition@22000000 {
111 			label = "kernel-nand";
114 		partition@26000000 {
116 			label = "dtb-nand";
117 			read-only;
120 		partition@27000000 {
122 			label = "reserved-nand";
126 	board-control@3,0 {
127 		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
129 		interrupt-parent = <&mpic>;
144 			 * clock-frequency will be set by U-Boot if
161 			#address-cells = <1>;
162 			#size-cells = <1>;
163 			compatible = "spansion,s25sl12801", "jedec,spi-nor";
165 			spi-max-frequency = <40000000>; /* input clock */
167 			partition@0 {
168 				label = "u-boot-spi";
170 				read-only;
172 			partition@100000 {
173 				label = "kernel-spi";
175 				read-only;
177 			partition@600000 {
178 				label = "dtb-spi";
180 				read-only;
182 			partition@700000 {
183 				label = "file system-spi";
190 		fsl,mode = "i2s-slave";
191 		codec-handle = <&wm8776>;
192 		fsl,ssi-asynchronous;
204 		phy0: ethernet-phy@0 {
208 		phy1: ethernet-phy@1 {
212 		tbi-phy@2 {
213 			device_type = "tbi-phy";
219 		compatible = "fsl,etsec-ptp";
222 		fsl,tclk-period	= <5>;
223 		fsl,tmr-prsc	= <2>;
224 		fsl,tmr-add	= <0xc01ebd3d>;
225 		fsl,tmr-fiper1	= <999999995>;
226 		fsl,tmr-fiper2	= <99990>;
227 		fsl,max-adj	= <266499999>;
231 		phy-handle = <&phy0>;
232 		phy-connection-type = "rgmii-id";
236 		phy-handle = <&phy1>;
237 		phy-connection-type = "rgmii-id";