alchemy/devboards/db1000.c

1 // SPDX-License-Identifier: GPL-2.0-or-later
10 #include <linux/dma-mapping.h>
11 #include <linux/gpio.h>
12 #include <linux/gpio/machine.h>
13 #include <linux/gpio/property.h>
23 #include <asm/mach-au1x00/au1000.h>
24 #include <asm/mach-au1x00/gpio-au1000.h>
25 #include <asm/mach-au1x00/au1000_dma.h>
26 #include <asm/mach-au1x00/au1100_mmc.h>
27 #include <asm/mach-db1x00/bcsr.h>
52 	return -ENODEV;  in db1000_board_setup()
58 		return -1;  in db1500_map_pci_irq()
69 	return -1;  in db1500_map_pci_irq()
88 	.name		= "alchemy-pci",
102 		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
113 	.name		= "au1100-lcd",
142 	.name		= "alchemy-ac97c",
143 	.id		= -1,
149 	.name		= "alchemy-pcm-dma",
154 	.name		= "ac97-codec",
155 	.id		= -1,
159 	.name		= "db1000-audio",
329 	.name		= "au1xxx-mmc",
364 	.name		= "au1xxx-mmc",
379 	.name	= "alchemy-gpio2",
384 	PROPERTY_ENTRY_GPIO("pendown-gpios",
411  * Alchemy GPIO 2 has its base at 200 so the GPIO lines
415 	PROPERTY_ENTRY_GPIO("miso-gpios",
417 	PROPERTY_ENTRY_GPIO("mosi-gpios",
419 	PROPERTY_ENTRY_GPIO("sck-gpios",
421 	PROPERTY_ENTRY_GPIO("cs-gpios",
462 		d0 = 0;	/* GPIO number, NOT irq! */  in db1000_dev_setup()
463 		d1 = 3; /* GPIO number, NOT irq! */  in db1000_dev_setup()
469 		d0 = 0; /* GPIO number, NOT irq! */  in db1000_dev_setup()
470 		d1 = 3; /* GPIO number, NOT irq! */  in db1000_dev_setup()
509 		d0 = 0; /* GPIO number, NOT irq! */  in db1000_dev_setup()
510 		d1 = 3; /* GPIO number, NOT irq! */  in db1000_dev_setup()
516 		d0 = 1; /* GPIO number, NOT irq! */  in db1000_dev_setup()
529 		d0 = 9; /* GPIO number, NOT irq! */  in db1000_dev_setup()
533 		/* pendown, rtc, daughtercard irqs */  in db1000_dev_setup()
551 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,  in db1000_dev_setup()
553 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,  in db1000_dev_setup()
555 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,  in db1000_dev_setup()
564 			AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,  in db1000_dev_setup()
566 			AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,  in db1000_dev_setup()
568 			AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,  in db1000_dev_setup()