Lines Matching +full:rx +full:- +full:input
1 /* SPDX-License-Identifier: GPL-2.0 */
5 * mcfuart.h -- ColdFire internal UART support defines.
7 * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
35 #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
51 #define MCFUART_UIPR 0x34 /* Input Port (r) */
60 #define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
61 #define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
62 #define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
63 #define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
107 #define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
108 #define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
109 #define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
130 #define MCFUART_UCR_RXNULL 0x00 /* No RX command */
131 #define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
132 #define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
135 * Define bit flags in Input Port Change Register (UIPCR).
141 * Define bit flags in Input Port Register (UIP).
154 #define MCFUART_UACR_IEC 0x01 /* Input enable control */