dts/rockchip/rk3568-bpi-r2-pro.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * Author: Frank Wunderlich <frank-w@public-files.de>
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
11 #include <dt-bindings/soc/rockchip,vop2.h>
15 	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
16 	compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568";
26 		stdout-path = "serial2:1500000n8";
30 		compatible = "gpio-leds";
31 		pinctrl-names = "default";
32 		pinctrl-0 = <&blue_led_pin &green_led_pin>;
34 		blue_led: led-0 {
36 			default-state = "off";
41 		green_led: led-1 {
43 			default-state = "on";
49 	dc_12v: dc-12v-regulator {
50 		compatible = "regulator-fixed";
51 		regulator-name = "dc_12v";
52 		regulator-always-on;
53 		regulator-boot-on;
54 		regulator-min-microvolt = <12000000>;
55 		regulator-max-microvolt = <12000000>;
58 	hdmi-con {
59 		compatible = "hdmi-connector";
64 				remote-endpoint = <&hdmi_out_con>;
69 	ir-receiver {
70 		compatible = "gpio-ir-receiver";
72 		pinctrl-names = "default";
73 		pinctrl-0 = <&ir_receiver_pin>;
76 	vcc3v3_sys: vcc3v3-sys-regulator {
77 		compatible = "regulator-fixed";
78 		regulator-name = "vcc3v3_sys";
79 		regulator-always-on;
80 		regulator-boot-on;
81 		regulator-min-microvolt = <3300000>;
82 		regulator-max-microvolt = <3300000>;
83 		vin-supply = <&dc_12v>;
86 	vcc5v0_sys: vcc5v0-sys-regulator {
87 		compatible = "regulator-fixed";
88 		regulator-name = "vcc5v0_sys";
89 		regulator-always-on;
90 		regulator-boot-on;
91 		regulator-min-microvolt = <5000000>;
92 		regulator-max-microvolt = <5000000>;
93 		vin-supply = <&dc_12v>;
96 	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
97 		compatible = "regulator-fixed";
98 		regulator-name = "pcie30_avdd0v9";
99 		regulator-always-on;
100 		regulator-boot-on;
101 		regulator-min-microvolt = <900000>;
102 		regulator-max-microvolt = <900000>;
103 		vin-supply = <&vcc3v3_sys>;
106 	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
107 		compatible = "regulator-fixed";
108 		regulator-name = "pcie30_avdd1v8";
109 		regulator-always-on;
110 		regulator-boot-on;
111 		regulator-min-microvolt = <1800000>;
112 		regulator-max-microvolt = <1800000>;
113 		vin-supply = <&vcc3v3_sys>;
117 	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
118 		compatible = "regulator-fixed";
119 		regulator-name = "vcc3v3_pcie";
120 		regulator-min-microvolt = <3300000>;
121 		regulator-max-microvolt = <3300000>;
122 		enable-active-high;
124 		startup-delay-us = <200000>;
125 		vin-supply = <&vcc5v0_sys>;
129 	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
130 		compatible = "regulator-fixed";
131 		regulator-name = "vcc3v3_minipcie";
132 		regulator-min-microvolt = <3300000>;
133 		regulator-max-microvolt = <3300000>;
134 		enable-active-high;
136 		pinctrl-names = "default";
137 		pinctrl-0 = <&minipcie_enable_h>;
138 		startup-delay-us = <50000>;
139 		vin-supply = <&vcc3v3_pi6c_05>;
143 	vcc3v3_ngff: vcc3v3-ngff-regulator {
144 		compatible = "regulator-fixed";
145 		regulator-name = "vcc3v3_ngff";
146 		regulator-min-microvolt = <3300000>;
147 		regulator-max-microvolt = <3300000>;
148 		enable-active-high;
150 		pinctrl-names = "default";
151 		pinctrl-0 = <&ngffpcie_enable_h>;
152 		startup-delay-us = <50000>;
153 		vin-supply = <&vcc3v3_pi6c_05>;
156 	vcc5v0_usb: vcc5v0-usb-regulator {
157 		compatible = "regulator-fixed";
158 		regulator-name = "vcc5v0_usb";
159 		regulator-always-on;
160 		regulator-boot-on;
161 		regulator-min-microvolt = <5000000>;
162 		regulator-max-microvolt = <5000000>;
163 		vin-supply = <&dc_12v>;
166 	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
167 		compatible = "regulator-fixed";
168 		enable-active-high;
170 		pinctrl-names = "default";
171 		pinctrl-0 = <&vcc5v0_usb_host_en>;
172 		regulator-name = "vcc5v0_usb_host";
173 		regulator-min-microvolt = <5000000>;
174 		regulator-max-microvolt = <5000000>;
175 		vin-supply = <&vcc5v0_usb>;
178 	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
179 		compatible = "regulator-fixed";
180 		enable-active-high;
182 		pinctrl-names = "default";
183 		pinctrl-0 = <&vcc5v0_usb_otg_en>;
184 		regulator-name = "vcc5v0_usb_otg";
185 		regulator-min-microvolt = <5000000>;
186 		regulator-max-microvolt = <5000000>;
187 		vin-supply = <&vcc5v0_usb>;
207 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
208 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
210 	phy-mode = "rgmii";
211 	pinctrl-names = "default";
212 	pinctrl-0 = <&gmac0_miim
217 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
218 	snps,reset-active-low;
219 	/* Reset time is 20ms, 100ms for rtl8211f */
220 	snps,reset-delays-us = <0 20000 100000>;
225 	fixed-link {
227 		full-duplex;
233 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
234 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
236 	phy-handle = <&rgmii_phy1>;
237 	phy-mode = "rgmii";
238 	pinctrl-names = "default";
239 	pinctrl-0 = <&gmac1m1_miim
245 	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
246 	snps,reset-active-low;
247 	/* Reset time is 20ms, 100ms for rtl8211f */
248 	snps,reset-delays-us = <0 20000 100000>;
257 	mali-supply = <&vdd_gpu>;
262 	avdd-0v9-supply = <&vdda0v9_image>;
263 	avdd-1v8-supply = <&vcca1v8_image>;
269 		remote-endpoint = <&vp0_out_hdmi>;
275 		remote-endpoint = <&hdmi_con_in>;
289 		interrupt-parent = <&gpio0>;
291 		#clock-cells = <1>;
292 		pinctrl-names = "default";
293 		pinctrl-0 = <&pmic_int>;
294 		rockchip,system-power-controller;
295 		vcc1-supply = <&vcc3v3_sys>;
296 		vcc2-supply = <&vcc3v3_sys>;
297 		vcc3-supply = <&vcc3v3_sys>;
298 		vcc4-supply = <&vcc3v3_sys>;
299 		vcc5-supply = <&vcc3v3_sys>;
300 		vcc6-supply = <&vcc3v3_sys>;
301 		vcc7-supply = <&vcc3v3_sys>;
302 		vcc8-supply = <&vcc3v3_sys>;
303 		vcc9-supply = <&vcc3v3_sys>;
304 		wakeup-source;
308 				regulator-name = "vdd_logic";
309 				regulator-always-on;
310 				regulator-boot-on;
311 				regulator-initial-mode = <0x2>;
312 				regulator-min-microvolt = <500000>;
313 				regulator-max-microvolt = <1350000>;
314 				regulator-ramp-delay = <6001>;
316 				regulator-state-mem {
317 					regulator-off-in-suspend;
322 				regulator-name = "vdd_gpu";
323 				regulator-always-on;
324 				regulator-initial-mode = <0x2>;
325 				regulator-min-microvolt = <500000>;
326 				regulator-max-microvolt = <1350000>;
327 				regulator-ramp-delay = <6001>;
329 				regulator-state-mem {
330 					regulator-off-in-suspend;
335 				regulator-name = "vcc_ddr";
336 				regulator-always-on;
337 				regulator-boot-on;
338 				regulator-initial-mode = <0x2>;
340 				regulator-state-mem {
341 					regulator-on-in-suspend;
346 				regulator-name = "vdd_npu";
347 				regulator-initial-mode = <0x2>;
348 				regulator-min-microvolt = <500000>;
349 				regulator-max-microvolt = <1350000>;
350 				regulator-ramp-delay = <6001>;
352 				regulator-state-mem {
353 					regulator-off-in-suspend;
358 				regulator-name = "vcc_1v8";
359 				regulator-always-on;
360 				regulator-boot-on;
361 				regulator-min-microvolt = <1800000>;
362 				regulator-max-microvolt = <1800000>;
364 				regulator-state-mem {
365 					regulator-off-in-suspend;
370 				regulator-name = "vdda0v9_image";
371 				regulator-always-on;
372 				regulator-min-microvolt = <900000>;
373 				regulator-max-microvolt = <900000>;
375 				regulator-state-mem {
376 					regulator-off-in-suspend;
381 				regulator-name = "vdda_0v9";
382 				regulator-always-on;
383 				regulator-boot-on;
384 				regulator-min-microvolt = <900000>;
385 				regulator-max-microvolt = <900000>;
387 				regulator-state-mem {
388 					regulator-off-in-suspend;
393 				regulator-name = "vdda0v9_pmu";
394 				regulator-always-on;
395 				regulator-boot-on;
396 				regulator-min-microvolt = <900000>;
397 				regulator-max-microvolt = <900000>;
399 				regulator-state-mem {
400 					regulator-on-in-suspend;
401 					regulator-suspend-microvolt = <900000>;
406 				regulator-name = "vccio_acodec";
407 				regulator-always-on;
408 				regulator-boot-on;
409 				regulator-min-microvolt = <3300000>;
410 				regulator-max-microvolt = <3300000>;
412 				regulator-state-mem {
413 					regulator-off-in-suspend;
418 				regulator-name = "vccio_sd";
419 				regulator-always-on;
420 				regulator-boot-on;
421 				regulator-min-microvolt = <1800000>;
422 				regulator-max-microvolt = <3300000>;
424 				regulator-state-mem {
425 					regulator-off-in-suspend;
430 				regulator-name = "vcc3v3_pmu";
431 				regulator-always-on;
432 				regulator-boot-on;
433 				regulator-min-microvolt = <3300000>;
434 				regulator-max-microvolt = <3300000>;
436 				regulator-state-mem {
437 					regulator-on-in-suspend;
438 					regulator-suspend-microvolt = <3300000>;
443 				regulator-name = "vcca_1v8";
444 				regulator-always-on;
445 				regulator-boot-on;
446 				regulator-min-microvolt = <1800000>;
447 				regulator-max-microvolt = <1800000>;
449 				regulator-state-mem {
450 					regulator-off-in-suspend;
455 				regulator-name = "vcca1v8_pmu";
456 				regulator-always-on;
457 				regulator-boot-on;
458 				regulator-min-microvolt = <1800000>;
459 				regulator-max-microvolt = <1800000>;
461 				regulator-state-mem {
462 					regulator-on-in-suspend;
463 					regulator-suspend-microvolt = <1800000>;
468 				regulator-name = "vcca1v8_image";
469 				regulator-always-on;
470 				regulator-min-microvolt = <1800000>;
471 				regulator-max-microvolt = <1800000>;
473 				regulator-state-mem {
474 					regulator-off-in-suspend;
479 				regulator-name = "vcc_3v3";
480 				regulator-always-on;
481 				regulator-boot-on;
483 				regulator-state-mem {
484 					regulator-off-in-suspend;
489 				regulator-name = "vcc3v3_sd";
490 				regulator-always-on;
492 				regulator-state-mem {
493 					regulator-off-in-suspend;
506 		interrupt-parent = <&gpio0>;
508 		#clock-cells = <0>;
509 		clock-output-names = "rtcic_32kout";
510 		pinctrl-names = "default";
511 		pinctrl-0 = <&hym8563_int>;
512 		wakeup-source;
527 	#address-cells = <1>;
528 	#size-cells = <0>;
535 			#address-cells = <1>;
536 			#size-cells = <0>;
562 				phy-mode = "rgmii";
564 				fixed-link {
566 					full-duplex;
575 	rgmii_phy1: ethernet-phy@0 {
576 		compatible = "ethernet-phy-ieee802.3-c22";
582 	data-lanes = <1 2>;
583 	phy-supply = <&vcc3v3_pi6c_05>;
589 	num-lanes = <1>;
590 	pinctrl-names = "default";
591 	pinctrl-0 = <&ngffpcie_reset_h>;
592 	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
593 	vpcie3v3-supply = <&vcc3v3_ngff>;
599 	num-lanes = <1>;
600 	pinctrl-names = "default";
601 	pinctrl-0 = <&minipcie_reset_h>;
602 	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
603 	vpcie3v3-supply = <&vcc3v3_minipcie>;
609 		blue_led_pin: blue-led-pin {
612 		green_led_pin: green-led-pin {
618 		hym8563_int: hym8563-int {
623 	ir-receiver {
624 		ir_receiver_pin: ir-receiver-pin {
630 		minipcie_enable_h: minipcie-enable-h {
634 		ngffpcie_enable_h: ngffpcie-enable-h {
638 		minipcie_reset_h: minipcie-reset-h {
642 		ngffpcie_reset_h: ngffpcie-reset-h {
666 	pmuio1-supply = <&vcc3v3_pmu>;
667 	pmuio2-supply = <&vcc3v3_pmu>;
668 	vccio1-supply = <&vccio_acodec>;
669 	vccio3-supply = <&vccio_sd>;
670 	vccio4-supply = <&vcc_3v3>;
671 	vccio5-supply = <&vcc_3v3>;
672 	vccio6-supply = <&vcc_1v8>;
673 	vccio7-supply = <&vcc_3v3>;
678 	/* fan 5v - gnd - pwm */
695 	pinctrl-0 = <&pwm12m1_pins>;
702 	pinctrl-0 = <&pwm13m1_pins>;
709 	pinctrl-0 = <&pwm14m1_pins>;
716 	pinctrl-0 = <&pwm15m1_pins>;
721 	vref-supply = <&vcca_1v8>;
730 	bus-width = <8>;
731 	max-frequency = <200000000>;
732 	non-removable;
733 	pinctrl-names = "default";
734 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
739 	bus-width = <4>;
740 	cap-sd-highspeed;
741 	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
742 	disable-wp;
743 	pinctrl-names = "default";
744 	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
745 	sd-uhs-sdr104;
746 	vmmc-supply = <&vcc3v3_sd>;
747 	vqmmc-supply = <&vccio_sd>;
754 	pinctrl-0 = <&spi3m1_pins>;
759 	rockchip,hw-tshut-mode = <1>;
760 	rockchip,hw-tshut-polarity = <0>;
770 	/* debug-uart */
776 	pinctrl-0 = <&uart7m1_xfer>;
783 	pinctrl-0 = <&uart9m1_xfer>;
817 	phy-supply = <&vcc5v0_usb_host>;
822 	phy-supply = <&vcc5v0_usb_otg>;
840 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
841 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
852 		remote-endpoint = <&hdmi_in_vp0>;