dts/rockchip/rk3566-powkiddy-rgb10max3.dts

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-powkiddy-rk2023.dtsi"
16 	compatible = "realtek,rtl8723ds-bt";
20 	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
22 	assigned-clock-rates = <32768>, <1200000000>,
28 		compatible = "powkiddy,rgb10max3-panel";
31 		iovcc-supply = <&vcc3v3_lcd0_n>;
32 		pinctrl-0 = <&lcd_rst>;
33 		pinctrl-names = "default";
34 		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
36 		vcc-supply = <&vcc3v3_lcd0_n>;
40 				remote-endpoint = <&mipi_out_panel>;
47 	default-state = "on";
55 		fcs,suspend-voltage-selector = <1>;
56 		regulator-always-on;
57 		regulator-boot-on;
58 		regulator-min-microvolt = <712500>;
59 		regulator-max-microvolt = <1390000>;
60 		regulator-name = "vdd_cpu";
61 		regulator-ramp-delay = <2300>;
62 		vin-supply = <&vcc_sys>;
63 		regulator-state-mem {
64 			regulator-off-in-suspend;
70 	amber_led: led-2 {
73 		max-brightness = <255>;
79 	pinctrl-0 = <&pwm0m1_pins>;
80 	pinctrl-names = "default";
85 	default-state = "off";