Lines Matching +full:vcc5 +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Based on rk3328-nanopi-r2s.dts, which is:
4 * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/leds/common.h>
15 compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
24 stdout-path = "serial2:1500000n8";
27 gmac_clk: gmac-clock {
28 compatible = "fixed-clock";
29 clock-frequency = <125000000>;
30 clock-output-names = "gmac_clkin";
31 #clock-cells = <0>;
35 compatible = "gpio-leds";
36 pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
37 pinctrl-names = "default";
39 led-0 {
45 led-1 {
49 linux,default-trigger = "heartbeat";
52 led-2 {
59 vcc_sd: sdmmc-regulator {
60 compatible = "regulator-fixed";
62 pinctrl-0 = <&sdmmc0m1_pin>;
63 pinctrl-names = "default";
64 regulator-name = "vcc_sd";
65 regulator-boot-on;
66 vin-supply = <&vcc_io>;
69 vcc_sys: vcc-sys-regulator {
70 compatible = "regulator-fixed";
71 regulator-name = "vcc_sys";
72 regulator-always-on;
73 regulator-boot-on;
74 regulator-min-microvolt = <5000000>;
75 regulator-max-microvolt = <5000000>;
78 vdd_5v_lan: vdd-5v-lan-regulator {
79 compatible = "regulator-fixed";
80 enable-active-high;
82 pinctrl-0 = <&lan_vdd_pin>;
83 pinctrl-names = "default";
84 regulator-name = "vdd_5v_lan";
85 regulator-always-on;
86 regulator-boot-on;
87 vin-supply = <&vcc_sys>;
92 cpu-supply = <&vdd_arm>;
96 cpu-supply = <&vdd_arm>;
100 cpu-supply = <&vdd_arm>;
104 cpu-supply = <&vdd_arm>;
112 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
113 assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
115 phy-handle = <&rtl8211e>;
116 phy-mode = "rgmii";
117 phy-supply = <&vcc_io>;
118 pinctrl-0 = <&rgmiim1_pins>;
119 pinctrl-names = "default";
126 compatible = "snps,dwmac-mdio";
127 #address-cells = <1>;
128 #size-cells = <0>;
130 rtl8211e: ethernet-phy@1 {
132 pinctrl-0 = <ð_phy_reset_pin>;
133 pinctrl-names = "default";
134 reset-assert-us = <10000>;
135 reset-deassert-us = <50000>;
136 reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
147 interrupt-parent = <&gpio1>;
149 #clock-cells = <1>;
150 clock-output-names = "xin32k", "rk805-clkout2";
151 gpio-controller;
152 #gpio-cells = <2>;
153 pinctrl-0 = <&pmic_int_l>;
154 pinctrl-names = "default";
155 rockchip,system-power-controller;
156 wakeup-source;
158 vcc1-supply = <&vcc_sys>;
159 vcc2-supply = <&vcc_sys>;
160 vcc3-supply = <&vcc_sys>;
161 vcc4-supply = <&vcc_sys>;
162 vcc5-supply = <&vcc_io>;
163 vcc6-supply = <&vcc_sys>;
167 regulator-name = "vdd_log";
168 regulator-always-on;
169 regulator-boot-on;
170 regulator-min-microvolt = <712500>;
171 regulator-max-microvolt = <1450000>;
172 regulator-ramp-delay = <12500>;
174 regulator-state-mem {
175 regulator-on-in-suspend;
176 regulator-suspend-microvolt = <1000000>;
181 regulator-name = "vdd_arm";
182 regulator-always-on;
183 regulator-boot-on;
184 regulator-min-microvolt = <712500>;
185 regulator-max-microvolt = <1450000>;
186 regulator-ramp-delay = <12500>;
188 regulator-state-mem {
189 regulator-on-in-suspend;
190 regulator-suspend-microvolt = <950000>;
195 regulator-name = "vcc_ddr";
196 regulator-always-on;
197 regulator-boot-on;
199 regulator-state-mem {
200 regulator-on-in-suspend;
205 regulator-name = "vcc_io";
206 regulator-always-on;
207 regulator-boot-on;
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
211 regulator-state-mem {
212 regulator-on-in-suspend;
213 regulator-suspend-microvolt = <3300000>;
218 regulator-name = "vcc_18";
219 regulator-always-on;
220 regulator-boot-on;
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
224 regulator-state-mem {
225 regulator-on-in-suspend;
226 regulator-suspend-microvolt = <1800000>;
231 regulator-name = "vcc18_emmc";
232 regulator-always-on;
233 regulator-boot-on;
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
237 regulator-state-mem {
238 regulator-on-in-suspend;
239 regulator-suspend-microvolt = <1800000>;
244 regulator-name = "vdd_10";
245 regulator-always-on;
246 regulator-boot-on;
247 regulator-min-microvolt = <1000000>;
248 regulator-max-microvolt = <1000000>;
250 regulator-state-mem {
251 regulator-on-in-suspend;
252 regulator-suspend-microvolt = <1000000>;
260 pmuio-supply = <&vcc_io>;
261 vccio1-supply = <&vcc_io>;
262 vccio2-supply = <&vcc18_emmc>;
263 vccio3-supply = <&vcc_io>;
264 vccio4-supply = <&vcc_io>;
265 vccio5-supply = <&vcc_io>;
266 vccio6-supply = <&vcc_io>;
272 eth_phy_reset_pin: eth-phy-reset-pin {
278 lan_led_pin: lan-led-pin {
282 sys_led_pin: sys-led-pin {
286 wan_led_pin: wan-led-pin {
292 lan_vdd_pin: lan-vdd-pin {
298 pmic_int_l: pmic-int-l {
309 bus-width = <4>;
310 cap-sd-highspeed;
311 disable-wp;
312 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
313 pinctrl-names = "default";
314 vmmc-supply = <&vcc_sd>;
322 compatible = "jedec,spi-nor";
324 spi-max-frequency = <50000000>;
329 rockchip,hw-tshut-mode = <0>;
330 rockchip,hw-tshut-polarity = <0>;
358 #address-cells = <1>;
359 #size-cells = <0>;