dts/renesas/salvator-common.dtsi

59 		 * This is same as <&rcar_sound 0>
63 		#clock-cells = <0>;
69 		pwms = <&pwm1 0 50000>;
71 		brightness-levels = <256 128 64 16 8 4 0>;
127 		pinctrl-0 = <&keys_pins>;
252 		states = <3300000 1>, <1800000 0>;
275 		states = <3300000 1>, <1800000 0>;
293 			#size-cells = <0>;
295 			port@0 {
296 				reg = <0>;
312 		#clock-cells = <0>;
319 		#clock-cells = <0>;
325 		#clock-cells = <0>;
331 		#clock-cells = <0>;
345 	pinctrl-0 = <&avb_pins>;
351 	phy0: ethernet-phy@0 {
355 		reg = <0>;
366 		port@0 {
368 				clock-lanes = <0>;
380 		port@0 {
382 				clock-lanes = <0>;
391 	pinctrl-0 = <&du_pins>;
396 		port@0 {
462 	pinctrl-0 = <&hscif1_pins>;
476 	pinctrl-0 = <&i2c2_pins>;
485 		#sound-dai-cells = <0>;
486 		reg = <0x10>;
506 		#clock-cells = <0>;
508 		reg = <0x4f>;
522 		reg = <0x20>;
529 		reg = <0x70 0x71 0x72 0x73 0x74 0x75
530 		       0x60 0x61 0x62 0x63 0x64 0x65>;
541 			#size-cells = <0>;
563 					clock-lanes = <0>;
573 					clock-lanes = <0>;
583 		reg = <0x7c>;
590 		reg = <0x7f>;
602 		pinctrl-0 = <&irq0_pins>;
606 		reg = <0x30>;
608 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
613 		rohm,ddr-backup-power = <0xf>;
629 		reg = <0x50>;
656 	pinctrl-0 = <&scif_clk_pins>;
792 	pinctrl-0 = <&pwm1_pins>;
799 	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
829 		#size-cells = <0>;
830 		rsnd_port0: port@0 {
831 			reg = <0>;
877 	flash@0 {
879 		reg = <0>;
886 			bootparam@0 {
887 				reg = <0x00000000 0x040000>;
891 				reg = <0x00040000 0x140000>;
895 				reg = <0x00180000 0x040000>;
899 				reg = <0x001c0000 0x040000>;
903 				reg = <0x00200000 0x440000>;
907 				reg = <0x00640000 0x100000>;
911 				reg = <0x00740000 0x080000>;
914 				reg = <0x007c0000 0x1400000>;
917 				reg = <0x01bc0000 0x2440000>;
935 	pinctrl-0 = <&scif1_pins>;
944 	pinctrl-0 = <&scif2_pins>;
955 	pinctrl-0 = <&sdhi0_pins>;
971 	pinctrl-0 = <&sdhi2_pins>;
989 	pinctrl-0 = <&sdhi3_pins>;
1012 	pinctrl-0 = <&usb0_pins>;
1020 	pinctrl-0 = <&usb1_pins>;
1076 	pinctrl-0 = <&usb30_pins>;
1099 	pinctrl-0 = <&usb2_pins>;