Lines Matching +full:irqc +full:- +full:rzg2l
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
10 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
27 reg_1p8v: regulator-1p8v {
28 compatible = "regulator-fixed";
29 regulator-name = "fixed-1.8V";
30 regulator-min-microvolt = <1800000>;
31 regulator-max-microvolt = <1800000>;
32 regulator-boot-on;
33 regulator-always-on;
36 reg_3p3v: regulator-3p3v {
37 compatible = "regulator-fixed";
38 regulator-name = "fixed-3.3V";
39 regulator-min-microvolt = <3300000>;
40 regulator-max-microvolt = <3300000>;
41 regulator-boot-on;
42 regulator-always-on;
45 reg_1p1v: regulator-vdd-core {
46 compatible = "regulator-fixed";
47 regulator-name = "fixed-1.1V";
48 regulator-min-microvolt = <1100000>;
49 regulator-max-microvolt = <1100000>;
50 regulator-boot-on;
51 regulator-always-on;
54 vccq_sdhi0: regulator-vccq-sdhi0 {
55 compatible = "regulator-gpio";
57 regulator-name = "SDHI0 VccQ";
58 regulator-min-microvolt = <1800000>;
59 regulator-max-microvolt = <3300000>;
61 regulator-boot-on;
63 regulator-always-on;
67 x2: x2-clock {
68 compatible = "fixed-clock";
69 #clock-cells = <0>;
70 clock-frequency = <32768>;
75 pinctrl-0 = <ð0_pins>;
76 pinctrl-names = "default";
77 phy-handle = <&phy0>;
78 phy-mode = "rgmii-id";
81 phy0: ethernet-phy@7 {
82 compatible = "ethernet-phy-id0022.1640",
83 "ethernet-phy-ieee802.3-c22";
85 interrupt-parent = <&irqc>;
87 rxc-skew-psec = <2400>;
88 txc-skew-psec = <2400>;
89 rxdv-skew-psec = <0>;
90 txen-skew-psec = <0>;
91 rxd0-skew-psec = <0>;
92 rxd1-skew-psec = <0>;
93 rxd2-skew-psec = <0>;
94 rxd3-skew-psec = <0>;
95 txd0-skew-psec = <0>;
96 txd1-skew-psec = <0>;
97 txd2-skew-psec = <0>;
98 txd3-skew-psec = <0>;
103 clock-frequency = <24000000>;
107 mali-supply = <®_1p1v>;
114 reg-names = "main", "rtc";
117 clock-names = "xin";
133 power-source = <1800>;
134 output-enable;
152 power-source = <1800>;
160 gpio-sd0-pwr-en-hog {
161 gpio-hog;
163 output-high;
164 line-name = "gpio_sd0_pwr_en";
168 qspi0-data {
170 power-source = <1800>;
173 qspi0-ctrl {
175 power-source = <1800>;
186 gpio-sd0-dev-sel-hog {
187 gpio-hog;
189 output-high;
190 line-name = "gpio_sd0_dev_sel";
197 power-source = <1800>;
202 power-source = <1800>;
207 power-source = <1800>;
214 power-source = <3300>;
219 power-source = <3300>;
230 power-source = <1800>;
235 power-source = <1800>;
245 pinctrl-0 = <&qspi0_pins>;
246 pinctrl-names = "default";
250 compatible = "micron,mt25qu512a", "jedec,spi-nor";
252 m25p,fast-read;
253 spi-max-frequency = <50000000>;
254 spi-rx-bus-width = <4>;
255 spi-tx-bus-width = <4>;
258 compatible = "fixed-partitions";
259 #address-cells = <1>;
260 #size-cells = <1>;
264 read-only;
275 pinctrl-0 = <&sdhi0_pins>;
276 pinctrl-1 = <&sdhi0_pins_uhs>;
277 pinctrl-names = "default", "state_uhs";
279 vmmc-supply = <®_3p3v>;
280 vqmmc-supply = <&vccq_sdhi0>;
281 bus-width = <4>;
282 sd-uhs-sdr50;
283 sd-uhs-sdr104;
290 pinctrl-0 = <&sdhi0_emmc_pins>;
291 pinctrl-1 = <&sdhi0_emmc_pins>;
292 pinctrl-names = "default", "state_uhs";
294 vmmc-supply = <®_3p3v>;
295 vqmmc-supply = <®_1p8v>;
296 bus-width = <8>;
297 mmc-hs200-1_8v;
298 non-removable;
299 fixed-emmc-driver-type = <1>;
306 timeout-sec = <60>;
311 timeout-sec = <60>;