Lines Matching +full:irqc +full:- +full:rzg2l

1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
10 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
38 reg_1p8v: regulator-1p8v {
39 compatible = "regulator-fixed";
40 regulator-name = "fixed-1.8V";
41 regulator-min-microvolt = <1800000>;
42 regulator-max-microvolt = <1800000>;
43 regulator-boot-on;
44 regulator-always-on;
47 reg_3p3v: regulator-3p3v {
48 compatible = "regulator-fixed";
49 regulator-name = "fixed-3.3V";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on;
53 regulator-always-on;
56 reg_1p1v: regulator-vdd-core {
57 compatible = "regulator-fixed";
58 regulator-name = "fixed-1.1V";
59 regulator-min-microvolt = <1100000>;
60 regulator-max-microvolt = <1100000>;
61 regulator-boot-on;
62 regulator-always-on;
65 vccq_sdhi0: regulator-vccq-sdhi0 {
66 compatible = "regulator-gpio";
68 regulator-name = "SDHI0 VccQ";
69 regulator-min-microvolt = <1800000>;
70 regulator-max-microvolt = <3300000>;
72 regulator-boot-on;
74 regulator-always-on;
78 x2: x2-clock {
79 compatible = "fixed-clock";
80 #clock-cells = <0>;
81 clock-frequency = <32768>;
86 pinctrl-0 = <&adc_pins>;
87 pinctrl-names = "default";
90 /delete-node/ channel@6;
91 /delete-node/ channel@7;
95 pinctrl-0 = <&eth0_pins>;
96 pinctrl-names = "default";
97 phy-handle = <&phy0>;
98 phy-mode = "rgmii-id";
101 phy0: ethernet-phy@7 {
102 compatible = "ethernet-phy-id0022.1640",
103 "ethernet-phy-ieee802.3-c22";
105 interrupt-parent = <&irqc>;
107 rxc-skew-psec = <2400>;
108 txc-skew-psec = <2400>;
109 rxdv-skew-psec = <0>;
110 txen-skew-psec = <0>;
111 rxd0-skew-psec = <0>;
112 rxd1-skew-psec = <0>;
113 rxd2-skew-psec = <0>;
114 rxd3-skew-psec = <0>;
115 txd0-skew-psec = <0>;
116 txd1-skew-psec = <0>;
117 txd2-skew-psec = <0>;
118 txd3-skew-psec = <0>;
123 pinctrl-0 = <&eth1_pins>;
124 pinctrl-names = "default";
125 phy-handle = <&phy1>;
126 phy-mode = "rgmii-id";
129 phy1: ethernet-phy@7 {
130 compatible = "ethernet-phy-id0022.1640",
131 "ethernet-phy-ieee802.3-c22";
133 interrupt-parent = <&irqc>;
135 rxc-skew-psec = <2400>;
136 txc-skew-psec = <2400>;
137 rxdv-skew-psec = <0>;
138 txen-skew-psec = <0>;
139 rxd0-skew-psec = <0>;
140 rxd1-skew-psec = <0>;
141 rxd2-skew-psec = <0>;
142 rxd3-skew-psec = <0>;
143 txd0-skew-psec = <0>;
144 txd1-skew-psec = <0>;
145 txd2-skew-psec = <0>;
146 txd3-skew-psec = <0>;
151 clock-frequency = <24000000>;
155 mali-supply = <&reg_1p1v>;
162 reg-names = "main", "rtc";
165 clock-names = "xin";
185 power-source = <1800>;
186 output-enable;
204 power-source = <1800>;
215 power-source = <1800>;
216 output-enable;
234 power-source = <1800>;
242 gpio-sd0-pwr-en-hog {
243 gpio-hog;
245 output-high;
246 line-name = "gpio_sd0_pwr_en";
250 qspi0-data {
252 power-source = <1800>;
255 qspi0-ctrl {
257 power-source = <1800>;
268 sd0-dev-sel-hog {
269 gpio-hog;
271 output-high;
272 line-name = "sd0_dev_sel";
279 power-source = <1800>;
284 power-source = <1800>;
289 power-source = <1800>;
296 power-source = <3300>;
301 power-source = <3300>;
312 power-source = <1800>;
317 power-source = <1800>;
327 pinctrl-0 = <&qspi0_pins>;
328 pinctrl-names = "default";
332 compatible = "micron,mt25qu512a", "jedec,spi-nor";
334 m25p,fast-read;
335 spi-max-frequency = <50000000>;
336 spi-rx-bus-width = <4>;
337 spi-tx-bus-width = <4>;
340 compatible = "fixed-partitions";
341 #address-cells = <1>;
342 #size-cells = <1>;
346 read-only;
357 pinctrl-0 = <&sdhi0_pins>;
358 pinctrl-1 = <&sdhi0_pins_uhs>;
359 pinctrl-names = "default", "state_uhs";
361 vmmc-supply = <&reg_3p3v>;
362 vqmmc-supply = <&vccq_sdhi0>;
363 bus-width = <4>;
364 sd-uhs-sdr50;
365 sd-uhs-sdr104;
372 pinctrl-0 = <&sdhi0_emmc_pins>;
373 pinctrl-1 = <&sdhi0_emmc_pins>;
374 pinctrl-names = "default", "state_uhs";
376 vmmc-supply = <&reg_3p3v>;
377 vqmmc-supply = <&reg_1p8v>;
378 bus-width = <8>;
379 mmc-hs200-1_8v;
380 non-removable;
381 fixed-emmc-driver-type = <1>;
388 timeout-sec = <60>;
393 timeout-sec = <60>;