dts/renesas/r8a779a0-falcon-cpu.dtsi

1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
16 	compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
30 		stdout-path = "serial0:115200n8";
34 		compatible = "gpio-keys";
36 		pinctrl-0 = <&keys_pins>;
37 		pinctrl-names = "default";
39 		key-1 {
43 			wakeup-source;
44 			debounce-interval = <20>;
47 		key-2 {
51 			wakeup-source;
52 			debounce-interval = <20>;
55 		key-3 {
59 			wakeup-source;
60 			debounce-interval = <20>;
65 		compatible = "gpio-leds";
67 		led-1 {
71 			function-enumerator = <1>;
73 		led-2 {
77 			function-enumerator = <2>;
79 		led-3 {
83 			function-enumerator = <3>;
108 	mini-dp-con {
109 		compatible = "dp-connector";
115 				remote-endpoint = <&sn65dsi86_out>;
120 	reg_1p2v: regulator-1p2v {
121 		compatible = "regulator-fixed";
122 		regulator-name = "fixed-1.2V";
123 		regulator-min-microvolt = <1200000>;
124 		regulator-max-microvolt = <1200000>;
125 		regulator-boot-on;
126 		regulator-always-on;
129 	reg_1p8v: regulator-1p8v {
130 		compatible = "regulator-fixed";
131 		regulator-name = "fixed-1.8V";
132 		regulator-min-microvolt = <1800000>;
133 		regulator-max-microvolt = <1800000>;
134 		regulator-boot-on;
135 		regulator-always-on;
138 	reg_3p3v: regulator-3p3v {
139 		compatible = "regulator-fixed";
140 		regulator-name = "fixed-3.3V";
141 		regulator-min-microvolt = <3300000>;
142 		regulator-max-microvolt = <3300000>;
143 		regulator-boot-on;
144 		regulator-always-on;
147 	sn65dsi86_refclk: clk-x6 {
148 		compatible = "fixed-clock";
149 		#clock-cells = <0>;
150 		clock-frequency = <38400000>;
158 		port@1 {
160 				remote-endpoint = <&sn65dsi86_in>;
161 				data-lanes = <1 2 3 4>;
172 	clock-frequency = <16666666>;
176 	clock-frequency = <32768>;
180 	pinctrl-0 = <&i2c0_pins>;
181 	pinctrl-names = "default";
184 	clock-frequency = <400000>;
188 		label = "cpu-board";
190 		pagesize = <8>;
195 	pinctrl-0 = <&i2c1_pins>;
196 	pinctrl-names = "default";
199 	clock-frequency = <400000>;
202 		pinctrl-0 = <&irq0_pins>;
203 		pinctrl-names = "default";
209 		clock-names = "refclk";
211 		interrupt-parent = <&intc_ex>;
214 		vccio-supply = <&reg_1p8v>;
215 		vpll-supply = <&reg_1p8v>;
216 		vcca-supply = <&reg_1p2v>;
217 		vcc-supply = <&reg_1p2v>;
220 			#address-cells = <1>;
221 			#size-cells = <0>;
226 					remote-endpoint = <&dsi0_out>;
230 			port@1 {
231 				reg = <1>;
233 					remote-endpoint = <&mini_dp_con_in>;
241 	pinctrl-0 = <&i2c6_pins>;
242 	pinctrl-names = "default";
245 	clock-frequency = <400000>;
249 	pinctrl-0 = <&mmc_pins>;
250 	pinctrl-1 = <&mmc_pins>;
251 	pinctrl-names = "default", "state_uhs";
253 	vmmc-supply = <&reg_3p3v>;
254 	vqmmc-supply = <&reg_1p8v>;
255 	mmc-hs200-1_8v;
256 	mmc-hs400-1_8v;
257 	bus-width = <8>;
258 	no-sd;
259 	no-sdio;
260 	non-removable;
261 	full-pwr-cycle-in-suspend;
266 	pinctrl-0 = <&scif_clk_pins>;
267 	pinctrl-names = "default";
291 		bias-pull-up;
297 		power-source = <1800>;
317 	pinctrl-0 = <&qspi0_pins>;
318 	pinctrl-names = "default";
323 		compatible = "spansion,s25fs512s", "jedec,spi-nor";
325 		spi-max-frequency = <40000000>;
326 		spi-rx-bus-width = <4>;
329 			compatible = "fixed-partitions";
330 			#address-cells = <1>;
331 			#size-cells = <1>;
335 				read-only;
345 	timeout-sec = <60>;
350 	pinctrl-0 = <&scif0_pins>;
351 	pinctrl-names = "default";
353 	uart-has-rtscts;
358 	clock-frequency = <24000000>;