dts/renesas/ebisu.dtsi

38 		 * This is same as <&rcar_sound 0>
42 		#clock-cells = <0>;
48 		pwms = <&pwm3 0 50000>;
50 		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
93 		pinctrl-0 = <&keys_pins>;
132 			#size-cells = <0>;
134 			port@0 {
135 				reg = <0>;
153 		reg = <0x0 0x48000000 0x0 0x38000000>;
176 		regulator-name = "D12.0V";
231 		states = <3300000 1>, <1800000 0>;
254 		states = <3300000 1>, <1800000 0>;
272 			#size-cells = <0>;
274 			port@0 {
275 				reg = <0>;
291 		#clock-cells = <0>;
297 		#clock-cells = <0>;
307 	pinctrl-0 = <&avb_pins>;
312 	phy0: ethernet-phy@0 {
316 		reg = <0>;
332 	pinctrl-0 = <&canfd0_pins>;
345 		port@0 {
347 				clock-lanes = <0>;
356 	pinctrl-0 = <&du_pins>;
363 	clock-names = "du.0", "du.1", "dclkin.0";
366 		port@0 {
393 		reg = <0x20>;
402 		reg = <0x39>;
418 			#size-cells = <0>;
420 			port@0 {
421 				reg = <0>;
438 		reg = <0x70>;
447 			#size-cells = <0>;
469 					clock-lanes = <0>;
483 		#sound-dai-cells = <0>;
484 		reg = <0x10>;
498 		#clock-cells = <0>;
500 		reg = <0x4f>;
515 		pinctrl-0 = <&irq0_pins>;
519 		reg = <0x30>;
521 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
526 		rohm,ddr-backup-power = <0x1>;
532 		reg = <0x50>;
543 	clock-names = "fck", "dclkin.0", "extal";
565 	clock-names = "fck", "dclkin.0", "extal";
681 	pinctrl-0 = <&pwm3_pins>;
688 	pinctrl-0 = <&pwm5_pins>;
695 	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
699 	#sound-dai-cells = <0>;
735 	pinctrl-0 = <&rpc_pins>;
740 	flash@0 {
742 		reg = <0>;
749 			bootparam@0 {
750 				reg = <0x00000000 0x040000>;
754 				reg = <0x00040000 0x140000>;
758 				reg = <0x00180000 0x040000>;
762 				reg = <0x001c0000 0x040000>;
766 				reg = <0x00200000 0x440000>;
770 				reg = <0x00640000 0x100000>;
774 				reg = <0x00740000 0x080000>;
777 				reg = <0x007c0000 0x1400000>;
780 				reg = <0x01bc0000 0x2440000>;
792 	pinctrl-0 = <&scif2_pins>;
799 	pinctrl-0 = <&sdhi0_pins>;
814 	pinctrl-0 = <&sdhi1_pins>;
829 	pinctrl-0 = <&sdhi3_pins>;
850 	pinctrl-0 = <&usb0_pins>;
871 	pinctrl-0 = <&usb30_pins>;