Lines Matching +full:vdda +full:- +full:vph +full:- +full:supply

1 // SPDX-License-Identifier: BSD-3-Clause
5 /dts-v1/;
9 #include <dt-bindings/leds/common.h>
11 /delete-node/ &cont_splash_mem;
12 /delete-node/ &qseecom_mem;
17 chassis-type = "handset";
18 qcom,msm-id = <349 0>;
19 qcom,board-id = <0x141 0xc100>;
20 qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
23 compatible = "led-backlight";
28 #address-cells = <2>;
29 #size-cells = <2>;
33 compatible = "simple-framebuffer";
41 power-domains = <&gcc MDSS_GDSC>;
53 gpio-keys {
54 compatible = "gpio-keys";
56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_key_default>;
59 key-volume-up {
66 reserved-memory {
69 no-map;
72 cont_splash_mem: cont-splash@90001000 {
74 no-map;
79 no-map;
85 console-size = <0x40000>;
86 pmsg-size = <0x40000>;
87 record-size = <0x3f800>;
91 vph_pwr: vph-pwr-regulator {
92 compatible = "regulator-fixed";
93 regulator-name = "vph_pwr";
94 regulator-always-on;
95 regulator-boot-on;
100 vdd-supply = <&pm8953_l3>;
101 vdda-pll-supply = <&pm8953_l7>;
102 vdda-phy-dpdm-supply = <&pm8953_l13>;
114 interrupt-parent = <&tlmm>;
117 touchscreen-inverted-x;
124 led-controller@36 {
128 #address-cells = <1>;
129 #size-cells = <0>;
133 default-trigger = "backlight";
135 led-sources = <0 1 2>;
147 compatible = "qcom,rpm-pm8953-regulators";
149 vdd_l1-supply = <&pm8953_s3>;
150 vdd_l2_l3-supply = <&pm8953_s3>;
151 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
152 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
153 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
156 regulator-min-microvolt = <984000>;
157 regulator-max-microvolt = <1240000>;
161 regulator-min-microvolt = <1036000>;
162 regulator-max-microvolt = <2040000>;
166 regulator-min-microvolt = <975000>;
167 regulator-max-microvolt = <1050000>;
171 regulator-min-microvolt = <975000>;
172 regulator-max-microvolt = <1175000>;
176 regulator-min-microvolt = <925000>;
177 regulator-max-microvolt = <925000>;
178 regulator-allow-set-load;
182 regulator-min-microvolt = <1800000>;
183 regulator-max-microvolt = <1800000>;
187 regulator-min-microvolt = <1800000>;
188 regulator-max-microvolt = <1800000>;
189 regulator-always-on;
190 regulator-boot-on;
194 regulator-min-microvolt = <1800000>;
195 regulator-max-microvolt = <1900000>;
199 regulator-min-microvolt = <2900000>;
200 regulator-max-microvolt = <2900000>;
204 regulator-min-microvolt = <3000000>;
205 regulator-max-microvolt = <3300000>;
209 regulator-min-microvolt = <2800000>;
210 regulator-max-microvolt = <3000000>;
214 regulator-min-microvolt = <2950000>;
215 regulator-max-microvolt = <2950000>;
219 regulator-min-microvolt = <1800000>;
220 regulator-max-microvolt = <2950000>;
224 regulator-min-microvolt = <3125000>;
225 regulator-max-microvolt = <3125000>;
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
234 regulator-min-microvolt = <2850000>;
235 regulator-max-microvolt = <2850000>;
239 regulator-min-microvolt = <1800000>;
240 regulator-max-microvolt = <2700000>;
241 regulator-always-on;
242 regulator-boot-on;
246 regulator-min-microvolt = <1200000>;
247 regulator-max-microvolt = <1350000>;
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
253 regulator-always-on;
257 regulator-min-microvolt = <975000>;
258 regulator-max-microvolt = <1225000>;
264 vmmc-supply = <&pm8953_l8>;
265 vqmmc-supply = <&pm8953_l5>;
271 vmmc-supply = <&pm8953_l11>;
272 vqmmc-supply = <&pm8953_l12>;
274 pinctrl-names = "default", "sleep";
275 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
276 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
282 gpio-reserved-ranges = <96 4>;
290 /delete-property/ usb-role-switch;