dts/qcom/sda660-inforce-ifc6560.dts

1 // SPDX-License-Identifier: BSD-3-Clause
9 /dts-v1/;
18 	chassis-type = "embedded"; /* SBC */
26 		stdout-path = "serial0:115200n8";
29 	gpio-keys {
30 		compatible = "gpio-keys";
32 		key-volup {
36 			debounce-interval = <15>;
41 	 * Until we hook up type-c detection, we
44 	extcon_usb: extcon-usb {
45 		compatible = "linux,extcon-usb-gpio";
46 		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
49 	hdmi-out {
50 		compatible = "hdmi-connector";
55 				remote-endpoint = <&adv7533_out>;
60 	vph_pwr: vph-pwr-regulator {
61 		compatible = "regulator-fixed";
62 		regulator-name = "vph_pwr";
63 		regulator-min-microvolt = <3800000>;
64 		regulator-max-microvolt = <3800000>;
66 		regulator-always-on;
67 		regulator-boot-on;
70 	v3p3_bck_bst: v3p3-bck-bst-regulator {
71 		compatible = "regulator-fixed";
72 		regulator-name = "v3p3_bck_bst";
74 		regulator-min-microvolt = <3300000>;
75 		regulator-max-microvolt = <3300000>;
77 		vin-supply = <&vph_pwr>;
80 	v1p2_ldo: v1p2-ldo-regulator {
81 		compatible = "regulator-fixed";
82 		regulator-name = "v1p2_ldo";
84 		regulator-min-microvolt = <1200000>;
85 		regulator-max-microvolt = <1200000>;
87 		vin-supply = <&vph_pwr>;
90 	v5p0_boost: v5p0-boost-regulator {
91 		compatible = "regulator-fixed";
92 		regulator-name = "v5p0_boost";
94 		regulator-min-microvolt = <5000000>;
95 		regulator-max-microvolt = <5000000>;
97 		vin-supply = <&vph_pwr>;
103 	vreg_l10a_1p8: vreg-l10a-regulator {
104 		compatible = "regulator-fixed";
105 		regulator-name = "vreg_l10a_1p8";
106 		regulator-min-microvolt = <1804000>;
107 		regulator-max-microvolt = <1896000>;
108 		regulator-always-on;
109 		regulator-boot-on;
114 	firmware-name = "qcom/sda660/adsp.mbn";
123 		reg-names = "main", "edid";
125 		interrupt-parent = <&pm660l_gpios>;
129 		clock-names = "cec";
134 		adi,dsi-lanes = <3>;
135 		avdd-supply = <&vreg_l13a_1p8>;
136 		dvdd-supply = <&vreg_l13a_1p8>;
137 		pvdd-supply = <&vreg_l13a_1p8>;
138 		a2vdd-supply = <&vreg_l13a_1p8>;
139 		v3p3-supply = <&v3p3_bck_bst>;
142 			#address-cells = <1>;
143 			#size-cells = <0>;
149 					remote-endpoint = <&mdss_dsi0_out>;
157 					remote-endpoint = <&hdmi_con>;
169 	/delete-property/ clocks;
181 	/delete-property/ clocks;
188 		compatible = "qcom,wcn3990-bt";
190 		vddio-supply = <&vreg_l13a_1p8>;
191 		vddxo-supply = <&vreg_l9a_1p8>;
192 		vddrf-supply = <&vreg_l6a_1p3>;
193 		vddch0-supply = <&vreg_l19a_3p3>;
194 		max-speed = <3200000>;
204 	vdda-supply = <&vreg_l1a_1p225>;
208 	remote-endpoint = <&adv7533_in>;
209 	data-lanes = <0 1 2 3>;
214 	vcca-supply = <&vreg_l1b_0p925>;
234 	vdd-supply = <&vreg_l1b_0p925>;
235 	vdda-pll-supply = <&vreg_l10a_1p8>;
236 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
242 	vdd-supply = <&vreg_l1b_0p925>;
243 	vdda-pll-supply = <&vreg_l10a_1p8>;
244 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
248 	regulators-0 {
249 		compatible = "qcom,rpm-pm660-regulators";
251 		vdd_s1-supply = <&vph_pwr>;
252 		vdd_s2-supply = <&vph_pwr>;
253 		vdd_s3-supply = <&vph_pwr>;
254 		vdd_s4-supply = <&vph_pwr>;
255 		vdd_s5-supply = <&vph_pwr>;
256 		vdd_s6-supply = <&vph_pwr>;
258 		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
259 		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
260 		vdd_l5-supply = <&vreg_s2b_1p05>;
261 		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
262 		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
265 			regulator-min-microvolt = <1805000>;
266 			regulator-max-microvolt = <2040000>;
267 			regulator-enable-ramp-delay = <200>;
268 			regulator-ramp-delay = <0>;
269 			regulator-always-on;
273 			regulator-min-microvolt = <1224000>;
274 			regulator-max-microvolt = <1350000>;
275 			regulator-enable-ramp-delay = <200>;
276 			regulator-ramp-delay = <0>;
280 			regulator-min-microvolt = <1150000>;
281 			regulator-max-microvolt = <1250000>;
282 			regulator-enable-ramp-delay = <250>;
283 			regulator-allow-set-load;
287 			regulator-min-microvolt = <1304000>;
288 			regulator-max-microvolt = <1368000>;
289 			regulator-enable-ramp-delay = <250>;
290 			regulator-ramp-delay = <0>;
291 			regulator-allow-set-load;
295 			regulator-min-microvolt = <1800000>;
296 			regulator-max-microvolt = <1800000>;
297 			regulator-enable-ramp-delay = <250>;
298 			regulator-ramp-delay = <0>;
299 			regulator-system-load = <325000>;
300 			regulator-allow-set-load;
304 			regulator-min-microvolt = <1804000>;
305 			regulator-max-microvolt = <1896000>;
306 			regulator-enable-ramp-delay = <250>;
307 			regulator-ramp-delay = <0>;
308 			regulator-allow-set-load;
313 			regulator-min-microvolt = <1800000>;
314 			regulator-max-microvolt = <1944000>;
315 			regulator-enable-ramp-delay = <250>;
316 			regulator-ramp-delay = <0>;
317 			regulator-always-on;
318 			regulator-boot-on;
322 			regulator-min-microvolt = <3312000>;
323 			regulator-max-microvolt = <3400000>;
324 			regulator-enable-ramp-delay = <250>;
325 			regulator-ramp-delay = <0>;
326 			regulator-allow-set-load;
330 	regulators-1 {
331 		compatible = "qcom,rpm-pm660l-regulators";
333 		vdd_s1-supply = <&vph_pwr>;
334 		vdd_s2-supply = <&vph_pwr>;
335 		vdd_s3_s4-supply = <&vph_pwr>;
336 		vdd_s5-supply = <&vph_pwr>;
337 		vdd_s6-supply = <&vph_pwr>;
339 		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
340 		vdd_l2-supply = <&vreg_bob>;
341 		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
342 		vdd_l4_l6-supply = <&vreg_bob>;
343 		vdd_bob-supply = <&vph_pwr>;
346 			regulator-min-microvolt = <1050000>;
347 			regulator-max-microvolt = <1050000>;
348 			regulator-enable-ramp-delay = <200>;
349 			regulator-ramp-delay = <0>;
353 			regulator-min-microvolt = <800000>;
354 			regulator-max-microvolt = <925000>;
355 			regulator-enable-ramp-delay = <250>;
356 			regulator-allow-set-load;
360 			regulator-min-microvolt = <1648000>;
361 			regulator-max-microvolt = <3100000>;
362 			regulator-enable-ramp-delay = <250>;
363 			regulator-ramp-delay = <0>;
364 			regulator-allow-set-load;
368 			regulator-min-microvolt = <2944000>;
369 			regulator-max-microvolt = <2952000>;
370 			regulator-enable-ramp-delay = <250>;
371 			regulator-ramp-delay = <0>;
373 			regulator-min-microamp = <200>;
374 			regulator-max-microamp = <600000>;
375 			regulator-system-load = <570000>;
376 			regulator-allow-set-load;
380 		 * Downstream specifies a range of 1721-3600mV,
383 		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
387 			regulator-min-microvolt = <1800000>;
388 			regulator-max-microvolt = <3328000>;
389 			regulator-enable-ramp-delay = <250>;
390 			regulator-system-load = <800000>;
391 			regulator-ramp-delay = <0>;
392 			regulator-allow-set-load;
396 			regulator-min-microvolt = <2700000>;
397 			regulator-max-microvolt = <3125000>;
398 			regulator-enable-ramp-delay = <250>;
402 			regulator-min-microvolt = <2800000>;
403 			regulator-max-microvolt = <3400000>;
404 			regulator-enable-ramp-delay = <250>;
405 			regulator-ramp-delay = <0>;
409 			regulator-min-microvolt = <3300000>;
410 			regulator-max-microvolt = <3624000>;
411 			regulator-enable-ramp-delay = <500>;
412 			regulator-ramp-delay = <0>;
418 	sd-cd-pins {
421 		bias-pull-up;
422 		drive-strength = <2>;
427 	sd-cd-pins {
430 		bias-disable;
431 		drive-strength = <2>;
437 	supports-cqe;
439 	vmmc-supply = <&vreg_l4b_2p95>;
440 	vqmmc-supply = <&vreg_l8a_1p8>;
442 	mmc-ddr-1_8v;
443 	mmc-hs400-1_8v;
444 	mmc-hs400-enhanced-strobe;
450 	vmmc-supply = <&vreg_l5b_2p95>;
451 	vqmmc-supply = <&vreg_l2b_2p95>;
453 	cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
454 	no-sdio;
455 	no-mmc;
459 	gpio-reserved-ranges = <0 4>, <8 4>;
480 	vdda-phy-supply = <&vreg_l1b_0p925>;
481 	vdda-pll-supply = <&vreg_l10a_1p8>;