dts/qcom/sc7180-trogdor-homestar.dtsi

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include "sc7180-trogdor-rt5682i-sku.dtsi"
9 #include "sc7180-trogdor-detachable.dtsi"
12 	/* BOARD-SPECIFIC TOP LEVEL NODES */
14 	max98360a_1: amplifier-1 {
16 		#sound-dai-cells = <0>;
19 	max98360a_2: amplifier-2 {
21 		#sound-dai-cells = <0>;
24 	max98360a_3: amplifier-3 {
26 		#sound-dai-cells = <0>;
29 	pp3300_touch: pp3300-touch-regulator {
30 		compatible = "regulator-fixed";
31 		regulator-name = "pp3300_touch";
33 		regulator-min-microvolt = <3300000>;
34 		regulator-max-microvolt = <3300000>;
37 		enable-active-high;
38 		pinctrl-names = "default";
39 		pinctrl-0 = <&en_pp3300_touch>;
41 		vin-supply = <&pp3300_a>;
44 	thermal-zones {
45 		skin_temp_thermal: skin-temp-thermal {
46 			polling-delay-passive = <250>;
48 			thermal-sensors = <&pm6150_adc_tm 1>;
49 			sustainable-power = <965>;
52 				skin_temp_alert0: trip-point0 {
58 				skin_temp_alert1: trip-point1 {
64 				skin-temp-crit {
71 			cooling-maps {
74 					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
80 					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
101 	/delete-property/ regulator-boot-on;
108 	clock-frequency = <400000>;
113 		pinctrl-names = "default";
114 		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
116 		interrupt-parent = <&tlmm>;
120 		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
122 		vdd-supply = <&pp3300_touch>;
138 	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
139 	/delete-property/ backlight;
146 		qcom,hw-settle-time = <200>;
154 	skin-temp-thermistor@1 {
156 		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
158 		qcom,hw-settle-time-us = <200>;
183 	qcom,playback-sd-lines = <0 1>;
187 	sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
191 	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
194 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
209 	output-low;
212 /* PINCTRL - board-specific pinctrl */
215 	gpio-line-names = "HUB_RST_L",
339 	en_pp3300_touch: en-pp3300-touch-state {
342 		drive-strength = <2>;
343 		bias-disable;