dts/qcom/msm8998-clamshell.dtsi

1 // SPDX-License-Identifier: GPL-2.0
15 	vph_pwr: vph-pwr-regulator {
16 		compatible = "regulator-fixed";
17 		regulator-name = "vph_pwr";
18 		regulator-always-on;
19 		regulator-boot-on;
27 		compatible = "qcom,wcn3990-bt";
29 		vddio-supply = <&vreg_s4a_1p8>;
30 		vddxo-supply = <&vreg_l7a_1p8>;
31 		vddrf-supply = <&vreg_l17a_1p3>;
32 		vddch0-supply = <&vreg_l25a_3p3>;
33 		max-speed = <3200000>;
38 	rx-pins {
39 		/delete-property/ bias-disable;
41 		 * Configure a pull-up on 45 (RX). This is needed to
43 		 * module is in tri-state (module powered off or not
46 		bias-pull-up;
49 	cts-pins {
50 		/delete-property/ bias-disable;
52 		 * Configure a pull-down on 47 (CTS) to match the pull
55 		bias-pull-down;
65 	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
69 	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
73 	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
77 	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
81 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
85 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
89 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
93 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
98  * up, because as far as Linux is concerned - they are unused. Disable it by default
119 	vdd_s1-supply = <&vph_pwr>;
121 	pm8005_s1: s1 { /* VDD_GFX supply */
122 		regulator-min-microvolt = <524000>;
123 		regulator-max-microvolt = <1100000>;
124 		regulator-enable-ramp-delay = <500>;
127 		regulator-always-on;
134 	vdd-supply = <&vreg_l1a_0p875>;
135 	vdda-pll-supply = <&vreg_l12a_1p8>;
136 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
140 	regulators-0 {
141 		compatible = "qcom,rpm-pm8998-regulators";
143 		vdd_s1-supply = <&vph_pwr>;
144 		vdd_s2-supply = <&vph_pwr>;
145 		vdd_s3-supply = <&vph_pwr>;
146 		vdd_s4-supply = <&vph_pwr>;
147 		vdd_s5-supply = <&vph_pwr>;
148 		vdd_s6-supply = <&vph_pwr>;
149 		vdd_s7-supply = <&vph_pwr>;
150 		vdd_s8-supply = <&vph_pwr>;
151 		vdd_s9-supply = <&vph_pwr>;
152 		vdd_s10-supply = <&vph_pwr>;
153 		vdd_s11-supply = <&vph_pwr>;
154 		vdd_s12-supply = <&vph_pwr>;
155 		vdd_s13-supply = <&vph_pwr>;
156 		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
157 		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
158 		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
159 		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
160 		vdd_l6-supply = <&vreg_s5a_2p04>;
161 		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
162 		vdd_l9-supply = <&vph_pwr>;
163 		vdd_l10_l23_l25-supply = <&vph_pwr>;
164 		vdd_l13_l19_l21-supply = <&vph_pwr>;
165 		vdd_l16_l28-supply = <&vph_pwr>;
166 		vdd_l18_l22-supply = <&vph_pwr>;
167 		vdd_l20_l24-supply = <&vph_pwr>;
168 		vdd_l26-supply = <&vreg_s3a_1p35>;
169 		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
172 			regulator-min-microvolt = <1352000>;
173 			regulator-max-microvolt = <1352000>;
177 			regulator-min-microvolt = <1800000>;
178 			regulator-max-microvolt = <1800000>;
179 			regulator-allow-set-load;
183 			regulator-min-microvolt = <1904000>;
184 			regulator-max-microvolt = <2040000>;
188 			regulator-min-microvolt = <900000>;
189 			regulator-max-microvolt = <1028000>;
193 			regulator-min-microvolt = <880000>;
194 			regulator-max-microvolt = <880000>;
195 			regulator-allow-set-load;
199 			regulator-min-microvolt = <1200000>;
200 			regulator-max-microvolt = <1200000>;
201 			regulator-allow-set-load;
205 			regulator-min-microvolt = <1000000>;
206 			regulator-max-microvolt = <1000000>;
210 			regulator-min-microvolt = <800000>;
211 			regulator-max-microvolt = <800000>;
215 			regulator-min-microvolt = <1808000>;
216 			regulator-max-microvolt = <1808000>;
220 			regulator-min-microvolt = <1800000>;
221 			regulator-max-microvolt = <1800000>;
222 			regulator-allow-set-load;
226 			regulator-min-microvolt = <1200000>;
227 			regulator-max-microvolt = <1200000>;
231 			regulator-min-microvolt = <1808000>;
232 			regulator-max-microvolt = <2960000>;
236 			regulator-min-microvolt = <1808000>;
237 			regulator-max-microvolt = <2960000>;
241 			regulator-min-microvolt = <1000000>;
242 			regulator-max-microvolt = <1000000>;
246 			regulator-min-microvolt = <1800000>;
247 			regulator-max-microvolt = <1800000>;
251 			regulator-min-microvolt = <1808000>;
252 			regulator-max-microvolt = <2960000>;
256 			regulator-min-microvolt = <1880000>;
257 			regulator-max-microvolt = <1880000>;
261 			regulator-min-microvolt = <1800000>;
262 			regulator-max-microvolt = <1800000>;
266 			regulator-min-microvolt = <2704000>;
267 			regulator-max-microvolt = <2704000>;
271 			regulator-min-microvolt = <1304000>;
272 			regulator-max-microvolt = <1304000>;
273 			regulator-allow-set-load;
277 			regulator-min-microvolt = <2704000>;
278 			regulator-max-microvolt = <2704000>;
282 			regulator-min-microvolt = <3008000>;
283 			regulator-max-microvolt = <3008000>;
287 			regulator-min-microvolt = <2960000>;
288 			regulator-max-microvolt = <2960000>;
289 			regulator-allow-set-load;
293 			regulator-min-microvolt = <2960000>;
294 			regulator-max-microvolt = <2960000>;
295 			regulator-allow-set-load;
296 			regulator-system-load = <800000>;
300 			regulator-min-microvolt = <2864000>;
301 			regulator-max-microvolt = <2864000>;
305 			regulator-min-microvolt = <3312000>;
306 			regulator-max-microvolt = <3312000>;
310 			regulator-min-microvolt = <3088000>;
311 			regulator-max-microvolt = <3088000>;
315 			regulator-min-microvolt = <3104000>;
316 			regulator-max-microvolt = <3312000>;
317 			regulator-allow-set-load;
321 			regulator-min-microvolt = <1200000>;
322 			regulator-max-microvolt = <1200000>;
326 			regulator-min-microvolt = <3008000>;
327 			regulator-max-microvolt = <3008000>;
331 			regulator-min-microvolt = <1800000>;
332 			regulator-max-microvolt = <1800000>;
336 			regulator-min-microvolt = <1800000>;
337 			regulator-max-microvolt = <1800000>;
349 	vmmc-supply = <&vreg_l21a_2p95>;
350 	vqmmc-supply = <&vreg_l13a_2p95>;
352 	pinctrl-names = "default", "sleep";
353 	pinctrl-0 = <&sdc2_on &sdc2_cd>;
354 	pinctrl-1 = <&sdc2_off &sdc2_cd>;
358 	gpio-reserved-ranges = <0 4>, <81 4>;
360 	touchpad: touchpad-pin-state {
363 		bias-pull-up;
373 	vdda-phy-supply = <&vreg_l1a_0p875>;
374 	vdda-pll-supply = <&vreg_l2a_1p2>;
382 	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
388 	vdda-phy-supply = <&vreg_l1a_0p875>;
389 	vdda-pll-supply = <&vreg_l2a_1p2>;
395 	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
396 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
397 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
398 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;