dts/qcom/msm8953-xiaomi-tissot.dts

1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
11 #include <dt-bindings/leds/common.h>
13 /delete-node/ &adsp_fw_mem;
14 /delete-node/ &qseecom_mem;
15 /delete-node/ &wcnss_fw_mem;
20 	chassis-type = "handset";
21 	qcom,msm-id = <293 0>;
22 	qcom,board-id = <0x1000b 0x00>;
24 	gpio-keys {
25 		compatible = "gpio-keys";
27 		pinctrl-names = "default";
28 		pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>;
30 		event-hall-sensor {
31 			label = "Hall Effect Sensor";
33 			linux,input-type = <EV_SW>;
35 			linux,can-disable;
38 		key-volume-up {
45 	reserved-memory {
48 			no-map;
53 			no-map;
58 			no-map;
64 			record-size = <0x1000>;
65 			console-size = <0x80000>;
66 			ftrace-size = <0x1000>;
67 			pmsg-size = <0x8000>;
71 	vph_pwr: vph-pwr-regulator {
72 		compatible = "regulator-fixed";
73 		regulator-name = "vph_pwr";
74 		regulator-always-on;
75 		regulator-boot-on;
80 	vdd-supply = <&pm8953_l3>;
81 	vdda-pll-supply = <&pm8953_l7>;
82 	vdda-phy-dpdm-supply = <&pm8953_l13>;
90 	max98927_codec: audio-codec@3a {
94 		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
96 		vmon-slot-no = <1>;
97 		imon-slot-no = <1>;
99 		#sound-dai-cells = <0>;
102 	led-controller@45 {
106 		vcc-supply = <&pm8953_l10>;
107 		vio-supply = <&pm8953_l5>;
109 		#address-cells = <1>;
110 		#size-cells = <0>;
114 			led-max-microamp = <5000>;
125 		compatible = "edt,edt-ft5406";
128 		interrupt-parent = <&tlmm>;
131 		pinctrl-names = "default";
132 		pinctrl-0 = <&ts_int_default>;
134 		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
136 		vcc-supply = <&pm8953_l10>;
138 		touchscreen-size-x = <1080>;
139 		touchscreen-size-y = <1920>;
149 	qcom,num-strings = <2>;
150 	qcom,external-pfet;
158 		compatible = "qcom,rpm-pm8953-regulators";
160 		vdd_s1-supply = <&vph_pwr>;
161 		vdd_s2-supply = <&vph_pwr>;
162 		vdd_s3-supply = <&vph_pwr>;
163 		vdd_s4-supply = <&vph_pwr>;
164 		vdd_s5-supply = <&vph_pwr>;
165 		vdd_s6-supply = <&vph_pwr>;
166 		vdd_s7-supply = <&vph_pwr>;
167 		vdd_l1-supply = <&pm8953_s3>;
168 		vdd_l2_l3-supply = <&pm8953_s3>;
169 		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
170 		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
171 		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
174 			regulator-min-microvolt = <870000>;
175 			regulator-max-microvolt = <1156000>;
179 			regulator-min-microvolt = <1224000>;
180 			regulator-max-microvolt = <1224000>;
184 			regulator-min-microvolt = <1900000>;
185 			regulator-max-microvolt = <2050000>;
189 			regulator-min-microvolt = <1000000>;
190 			regulator-max-microvolt = <1000000>;
194 			regulator-min-microvolt = <1200000>;
195 			regulator-max-microvolt = <1225000>;
199 			regulator-min-microvolt = <925000>;
200 			regulator-max-microvolt = <925000>;
204 			regulator-min-microvolt = <1800000>;
205 			regulator-max-microvolt = <1800000>;
209 			regulator-min-microvolt = <1800000>;
210 			regulator-max-microvolt = <1800000>;
214 			regulator-min-microvolt = <1800000>;
215 			regulator-max-microvolt = <1900000>;
219 			regulator-min-microvolt = <2900000>;
220 			regulator-max-microvolt = <2900000>;
224 			regulator-min-microvolt = <3300000>;
225 			regulator-max-microvolt = <3300000>;
229 			regulator-min-microvolt = <2850000>;
230 			regulator-max-microvolt = <2850000>;
234 			regulator-min-microvolt = <2950000>;
235 			regulator-max-microvolt = <2950000>;
239 			regulator-min-microvolt = <1800000>;
240 			regulator-max-microvolt = <2950000>;
244 			regulator-min-microvolt = <3125000>;
245 			regulator-max-microvolt = <3125000>;
249 			regulator-min-microvolt = <1800000>;
250 			regulator-max-microvolt = <1800000>;
254 			regulator-min-microvolt = <2750000>;
255 			regulator-max-microvolt = <2850000>;
259 			regulator-min-microvolt = <1200000>;
260 			regulator-max-microvolt = <1350000>;
264 			regulator-min-microvolt = <2800000>;
265 			regulator-max-microvolt = <2800000>;
269 			regulator-min-microvolt = <1200000>;
270 			regulator-max-microvolt = <1225000>;
276 	vmmc-supply = <&pm8953_l8>;
277 	vqmmc-supply = <&pm8953_l5>;
283 	vmmc-supply = <&pm8953_l11>;
284 	vqmmc-supply = <&pm8953_l12>;
286 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
288 	pinctrl-names = "default", "sleep";
289 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
290 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
296 	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
298 	gpio_hall_sensor_default: gpio-hall-sensor-state {
301 		drive-strength = <2>;
302 		bias-pull-up;
305 	ts_int_default: ts-int-default-state {
308 		drive-strength = <2>;
309 		bias-pull-up;
314 	pinctrl-names = "default";
315 	pinctrl-0 = <&uart_console_active>;
325 	/delete-property/ usb-role-switch;