dts/qcom/msm8953-xiaomi-mido.dts

1 // SPDX-License-Identifier: BSD-3-Clause
2 /dts-v1/;
4 #include "msm8953.dtsi"
7 #include <dt-bindings/leds/common.h>
9 /delete-node/ &cont_splash_mem;
10 /delete-node/ &qseecom_mem;
14 	compatible = "xiaomi,mido", "qcom,msm8953";
15 	chassis-type = "handset";
16 	qcom,msm-id = <293 0>;
17 	qcom,board-id = <11 0>;
24 	speaker_amp: audio-amplifier {
26 		mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
28 		sound-name-prefix = "Speaker Amp";
32 		#address-cells = <2>;
33 		#size-cells = <2>;
37 			compatible = "simple-framebuffer";
45 			power-domains = <&gcc MDSS_GDSC>;
47 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
48 				 <&gcc GCC_MDSS_AXI_CLK>,
49 				 <&gcc GCC_MDSS_VSYNC_CLK>,
50 				 <&gcc GCC_MDSS_MDP_CLK>,
51 				 <&gcc GCC_MDSS_BYTE0_CLK>,
52 				 <&gcc GCC_MDSS_PCLK0_CLK>,
53 				 <&gcc GCC_MDSS_ESC0_CLK>;
57 	gpio-keys {
58 		compatible = "gpio-keys";
60 		pinctrl-names = "default";
61 		pinctrl-0 = <&gpio_key_default>;
63 		key-volume-up {
70 	reserved-memory {
73 			no-map;
76 		cont_splash_mem: cont-splash@90001000 {
78 			no-map;
84 			console-size = <0x100000>;
88 	vph_pwr: vph-pwr-regulator {
89 		compatible = "regulator-fixed";
90 		regulator-name = "vph_pwr";
91 		regulator-min-microvolt = <3700000>;
92 		regulator-max-microvolt = <3700000>;
93 		regulator-always-on;
94 		regulator-boot-on;
99 	vdd-supply = <&pm8953_l3>;
100 	vdda-pll-supply = <&pm8953_l7>;
101 	vdda-phy-dpdm-supply = <&pm8953_l13>;
109 	led-controller@45 {
113 		vcc-supply = <&pm8953_l10>;
114 		vio-supply = <&pm8953_l5>;
116 		#address-cells = <1>;
117 		#size-cells = <0>;
123 			led-max-microamp = <5000>;
130 			led-max-microamp = <5000>;
137 			led-max-microamp = <5000>;
146 		compatible = "edt,edt-ft5406";
149 		interrupt-parent = <&tlmm>;
152 		pinctrl-names = "default";
153 		pinctrl-0 = <&ts_int_active>;
155 		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
157 		vcc-supply = <&pm8953_l10>;
159 		touchscreen-size-x = <1080>;
160 		touchscreen-size-y = <1920>;
171 		compatible = "qcom,rpm-pm8953-regulators";
173 		vdd_s1-supply = <&vph_pwr>;
174 		vdd_s2-supply = <&vph_pwr>;
175 		vdd_s3-supply = <&vph_pwr>;
176 		vdd_s4-supply = <&vph_pwr>;
177 		vdd_s5-supply = <&vph_pwr>;
178 		vdd_s6-supply = <&vph_pwr>;
179 		vdd_s7-supply = <&vph_pwr>;
180 		vdd_l1-supply = <&pm8953_s3>;
181 		vdd_l2_l3-supply = <&pm8953_s3>;
182 		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
183 		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
184 		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
185 		vdd_l23-supply = <&pm8953_s3>;
188 			regulator-min-microvolt = <863000>;
189 			regulator-max-microvolt = <1152000>;
193 			regulator-min-microvolt = <1224000>;
194 			regulator-max-microvolt = <1224000>;
198 			regulator-min-microvolt = <1896000>;
199 			regulator-max-microvolt = <2048000>;
203 			regulator-min-microvolt = <1000000>;
204 			regulator-max-microvolt = <1100000>;
208 			regulator-min-microvolt = <975000>;
209 			regulator-max-microvolt = <1225000>;
213 			regulator-min-microvolt = <925000>;
214 			regulator-max-microvolt = <925000>;
215 			regulator-allow-set-load;
219 			regulator-min-microvolt = <1800000>;
220 			regulator-max-microvolt = <1800000>;
224 			regulator-min-microvolt = <1800000>;
225 			regulator-max-microvolt = <1800000>;
226 			regulator-always-on;
230 			regulator-min-microvolt = <1800000>;
231 			regulator-max-microvolt = <1900000>;
235 			regulator-min-microvolt = <2900000>;
236 			regulator-max-microvolt = <2900000>;
240 			regulator-min-microvolt = <3000000>;
241 			regulator-max-microvolt = <3300000>;
245 			regulator-min-microvolt = <2850000>;
246 			regulator-max-microvolt = <2850000>;
247 			regulator-always-on;
251 			regulator-min-microvolt = <2950000>;
252 			regulator-max-microvolt = <2950000>;
256 			regulator-min-microvolt = <1800000>;
257 			regulator-max-microvolt = <2950000>;
261 			regulator-min-microvolt = <3125000>;
262 			regulator-max-microvolt = <3125000>;
266 			regulator-min-microvolt = <1800000>;
267 			regulator-max-microvolt = <1800000>;
271 			regulator-min-microvolt = <2850000>;
272 			regulator-max-microvolt = <2850000>;
276 			regulator-min-microvolt = <1200000>;
277 			regulator-max-microvolt = <1350000>;
281 			regulator-min-microvolt = <2800000>;
282 			regulator-max-microvolt = <2850000>;
283 			regulator-always-on;
287 			regulator-min-microvolt = <975000>;
288 			regulator-max-microvolt = <1225000>;
294 	vmmc-supply = <&pm8953_l8>;
295 	vqmmc-supply = <&pm8953_l5>;
301 	vmmc-supply = <&pm8953_l11>;
302 	vqmmc-supply = <&pm8953_l12>;
304 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
306 	pinctrl-names = "default", "sleep";
307 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
308 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
314 	gpio-reserved-ranges = <0 4>, <135 4>;
316 	ts_int_active: ts-int-active-state {
319 		drive-strength = <8>;
320 		bias-pull-up;
329 	/delete-property/ usb-role-switch;