dts/qcom/msm8939-longcheer-l9100.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8939-pm8916.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
17 	chassis-type = "handset";
26 		stdout-path = "serial0";
29 	gpio-hall-sensor {
30 		compatible = "gpio-keys";
32 		pinctrl-0 = <&gpio_hall_sensor_default>;
33 		pinctrl-names = "default";
37 		event-hall-sensor {
40 			linux,input-type = <EV_SW>;
42 			linux,can-disable;
46 	gpio-keys {
47 		compatible = "gpio-keys";
49 		pinctrl-0 = <&gpio_keys_default>;
50 		pinctrl-names = "default";
54 		button-volume-up {
62 		compatible = "gpio-leds";
64 		led-0 {
67 			default-state = "off";
70 			pinctrl-0 = <&button_backlight_default>;
71 			pinctrl-names = "default";
75 	reg_ts_vdd: regulator-vdd-ts {
76 		compatible = "regulator-fixed";
77 		regulator-name = "regulator-vdd-ts";
78 		regulator-min-microvolt = <2850000>;
79 		regulator-max-microvolt = <2850000>;
82 		enable-active-high;
84 		pinctrl-0 = <&ts_vdd_default>;
85 		pinctrl-names = "default";
89 		compatible = "pwm-backlight";
91 		brightness-levels = <0 255>;
92 		num-interpolated-steps = <255>;
93 		default-brightness-level = <128>;
94 		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
96 		pinctrl-0 = <&lcd_bl_en_default>;
97 		pinctrl-names = "default";
100 	flash-led-controller {
102 		flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
103 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
105 		pinctrl-0 = <&camera_front_flash_default>;
106 		pinctrl-names = "default";
108 		led {
111 			flash-max-timeout-us = <250000>;
115 	usb_id: usb-id {
116 		compatible = "linux,extcon-usb-gpio";
117 		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
118 		pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
119 		pinctrl-names = "default";
127 	led-controller@30 {
130 		#address-cells = <1>;
131 		#size-cells = <0>;
133 		vin-supply = <&pm8916_l17>;
134 		vio-supply = <&pm8916_l6>;
136 		pinctrl-0 = <&status_led_default>;
137 		pinctrl-names = "default";
139 		multi-led {
143 			#address-cells = <1>;
144 			#size-cells = <0>;
146 			led@0 {
151 			led@1 {
156 			led@2 {
163 	flash-led-controller@53 {
167 		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
169 		pinctrl-0 = <&camera_rear_flash_default>;
170 		pinctrl-names = "default";
172 		#address-cells = <1>;
173 		#size-cells = <0>;
175 		led@0 {
179 			led-sources = <0>, <1>;
188 		compatible = "asahi-kasei,ak09911";
191 		vdd-supply = <&pm8916_l17>;
192 		vid-supply = <&pm8916_l6>;
194 		reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
196 		pinctrl-0 = <&mag_reset_default>;
197 		pinctrl-names = "default";
200 	light-sensor@23 {
203 		proximity-near-level = <75>;
205 		vdd-supply = <&pm8916_l17>;
206 		vddio-supply = <&pm8916_l5>;
208 		interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
210 		pinctrl-0 = <&light_int_default>;
211 		pinctrl-names = "default";
218 		vdd-supply = <&pm8916_l17>;
219 		vddio-supply = <&pm8916_l6>;
230 		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
232 		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
234 		vdda-supply = <&pm8916_l6>;
235 		vdd-supply = <&reg_ts_vdd>;
237 		pinctrl-0 = <&ts_int_reset_default>;
238 		pinctrl-names = "default";
250 	status_led_default: status-led-default-state {
253 		power-source = <PM8916_GPIO_VPH>;
254 		bias-disable;
255 		output-high;
260 	pwm_out: mpp4-state {
263 		power-source = <PM8916_MPP_VPH>;
264 		output-low;
270 	pinctrl-0 = <&pwm_out>;
271 	pinctrl-names = "default";
282 		regulator-min-microvolt = <2850000>;
283 		regulator-max-microvolt = <2850000>;
296 	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
297 	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
298 	pinctrl-names = "default", "sleep";
300 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
327 	button_backlight_default: button-backlight-default-state {
330 		drive-strength = <2>;
331 		bias-disable;
334 	camera_front_flash_default: camera-front-flash-default-state {
337 		drive-strength = <2>;
338 		bias-disable;
341 	camera_rear_flash_default: camera-rear-flash-default-state {
344 		drive-strength = <2>;
345 		bias-disable;
348 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
351 		drive-strength = <2>;
352 		bias-disable;
355 	gpio_keys_default: gpio-keys-default-state {
358 		drive-strength = <2>;
359 		bias-pull-up;
362 	lcd_bl_en_default: lcd-bl-en-default-state {
365 		drive-strength = <2>;
366 		bias-disable;
369 	light_int_default: light-int-default-state {
372 		drive-strength = <2>;
373 		bias-disable;
376 	mag_reset_default: mag-reset-default-state {
379 		drive-strength = <2>;
380 		bias-disable;
383 	sdc2_cd_default: sdc2-cd-default-state {
386 		drive-strength = <2>;
387 		bias-disable;
390 	ts_int_reset_default: ts-int-reset-default-state {
393 		drive-strength = <2>;
394 		bias-disable;
397 	ts_vdd_default: ts-vdd-default-state {
400 		drive-strength = <2>;
401 		bias-disable;
404 	usb_id_default: usb-id-default-state {
407 		drive-strength = <8>;
408 		bias-pull-up;
411 	usb_id_switch_default: usb-id-switch-default-state {
414 		drive-strength = <2>;
415 		output-high;