dts/qcom/msm8939-huawei-kiwi.dts

1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8939-pm8916.dtsi"
6 #include <dt-bindings/gpio/gpio.h>
11 	chassis-type = "handset";
20 		stdout-path = "serial0";
23 	reserved-memory {
26 			no-map;
30 	gpio-hall-sensor {
31 		compatible = "gpio-keys";
33 		pinctrl-0 = <&gpio_hall_sensor_default>;
34 		pinctrl-names = "default";
36 		label = "GPIO Hall Effect Sensor";
38 		event-hall-sensor {
39 			label = "Hall Effect Sensor";
41 			linux,input-type = <EV_SW>;
43 			linux,can-disable;
47 	gpio-keys {
48 		compatible = "gpio-keys";
50 		pinctrl-0 = <&gpio_keys_default>;
51 		pinctrl-names = "default";
55 		button-volume-up {
62 	usb_id: usb-id {
63 		compatible = "linux,extcon-usb-gpio";
64 		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
65 		pinctrl-0 = <&usb_id_default>;
66 		pinctrl-names = "default";
74 		compatible = "kionix,kx023-1025";
77 		vdd-supply = <&pm8916_l17>;
78 		vddio-supply = <&pm8916_l6>;
79 		pinctrl-0 = <&accel_int_default>;
80 		pinctrl-names = "default";
81 		mount-matrix = "-1", "0", "0",
90 		interrupt-parent = <&tlmm>;
93 		vdd-supply = <&pm8916_l17>;
94 		vddio-supply = <&pm8916_l6>;
96 		led-max-microamp = <25000>;
97 		amstaos,proximity-diodes = <0>;
99 		pinctrl-0 = <&prox_irq_default>;
100 		pinctrl-names = "default";
111 		interrupt-parent = <&tlmm>;
114 		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
120 		vdd-supply = <&pm8916_l16>;
121 		vddio-supply = <&pm8916_l16>;
123 		pinctrl-0 = <&touchscreen_default>;
124 		pinctrl-names = "default";
133 	regulator-min-microvolt = <2950000>;
134 	regulator-max-microvolt = <2950000>;
144 		regulator-min-microvolt = <1800000>;
145 		regulator-max-microvolt = <1800000>;
149 		regulator-min-microvolt = <2850000>;
150 		regulator-max-microvolt = <2850000>;
163 	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
164 	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
165 	pinctrl-names = "default", "sleep";
167 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
194 	accel_int_default: accel-int-default-state {
197 		drive-strength = <2>;
198 		bias-disable;
201 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
204 		drive-strength = <2>;
205 		bias-disable;
208 	gpio_keys_default: gpio-keys-default-state {
211 		drive-strength = <2>;
212 		bias-pull-up;
215 	prox_irq_default: prox-irq-default-state {
218 		drive-strength = <2>;
219 		bias-disable;
222 	sdc2_cd_default: sdc2-cd-default-state {
225 		drive-strength = <2>;
226 		bias-disable;
229 	touchscreen_default: touchscreen-default-state {
232 		drive-strength = <2>;
233 		bias-disable;
236 	usb_id_default: usb-id-default-state {
239 		drive-strength = <8>;
240 		bias-pull-up;