Lines Matching +full:mac +full:- +full:divider
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
25 stdout-path = &uart2;
33 gpio-keys {
34 compatible = "gpio-keys";
36 key-user-pb {
42 key-user-pb1x {
45 interrupt-parent = <&gsc>;
49 key-erased {
52 interrupt-parent = <&gsc>;
56 key-eeprom-wp {
59 interrupt-parent = <&gsc>;
63 switch-hold {
66 interrupt-parent = <&gsc>;
71 led-controller {
72 compatible = "gpio-leds";
73 pinctrl-names = "default";
74 pinctrl-0 = <&pinctrl_gpio_leds>;
76 led-0 {
81 default-state = "off";
84 led-1 {
89 default-state = "off";
92 led-2 {
97 default-state = "off";
100 led-3 {
105 default-state = "off";
108 led-4 {
113 default-state = "off";
116 led-5 {
121 default-state = "off";
124 led-6 {
129 default-state = "off";
132 led-7 {
137 default-state = "off";
140 led-8 {
145 default-state = "off";
148 led-9 {
153 default-state = "off";
156 led-a {
161 default-state = "off";
164 led-b {
169 default-state = "off";
173 pcie0_refclk: pcie0-refclk {
174 compatible = "fixed-clock";
175 #clock-cells = <0>;
176 clock-frequency = <100000000>;
179 reg_3p3v: regulator-3p3v {
180 compatible = "regulator-fixed";
181 regulator-name = "3P3V";
182 regulator-min-microvolt = <3300000>;
183 regulator-max-microvolt = <3300000>;
184 regulator-always-on;
189 cpu-supply = <&buck2>;
193 cpu-supply = <&buck2>;
197 cpu-supply = <&buck2>;
201 cpu-supply = <&buck2>;
205 operating-points-v2 = <&ddrc_opp_table>;
207 ddrc_opp_table: opp-table {
208 compatible = "operating-points-v2";
210 opp-25000000 {
211 opp-hz = /bits/ 64 <25000000>;
214 opp-100000000 {
215 opp-hz = /bits/ 64 <100000000>;
218 opp-750000000 {
219 opp-hz = /bits/ 64 <750000000>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_fec1>;
227 phy-mode = "rgmii-id";
228 phy-handle = <ðphy0>;
229 local-mac-address = [00 00 00 00 00 00];
233 #address-cells = <1>;
234 #size-cells = <0>;
236 ethphy0: ethernet-phy@0 {
237 compatible = "ethernet-phy-ieee802.3-c22";
239 rx-internal-delay-ps = <2000>;
240 tx-internal-delay-ps = <2500>;
246 gpio-line-names = "", "", "", "", "", "", "", "",
253 gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
260 gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
267 clock-frequency = <100000>;
268 pinctrl-names = "default", "gpio";
269 pinctrl-0 = <&pinctrl_i2c1>;
270 pinctrl-1 = <&pinctrl_i2c1_gpio>;
271 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
272 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
278 pinctrl-0 = <&pinctrl_gsc>;
279 interrupt-parent = <&gpio4>;
281 interrupt-controller;
282 #interrupt-cells = <1>;
283 #address-cells = <1>;
284 #size-cells = <0>;
287 compatible = "gw,gsc-adc";
288 #address-cells = <1>;
289 #size-cells = <0>;
307 gw,voltage-divider-ohms = <22100 1000>;
308 gw,voltage-offset-microvolt = <700000>;
315 gw,voltage-divider-ohms = <10000 10000>;
322 gw,voltage-divider-ohms = <10000 10000>;
359 gw,voltage-divider-ohms = <10000 10000>;
367 gpio-controller;
368 #gpio-cells = <2>;
369 interrupt-parent = <&gsc>;
404 clock-frequency = <400000>;
405 pinctrl-names = "default", "gpio";
406 pinctrl-0 = <&pinctrl_i2c2>;
407 pinctrl-1 = <&pinctrl_i2c2_gpio>;
408 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
409 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
415 pinctrl-names = "default";
416 pinctrl-0 = <&pinctrl_pmic>;
417 interrupt-parent = <&gpio3>;
419 rohm,reset-snvs-powered;
420 #clock-cells = <0>;
422 clock-output-names = "clk-32k-out";
425 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
427 regulator-name = "buck1";
428 regulator-min-microvolt = <700000>;
429 regulator-max-microvolt = <1300000>;
430 regulator-boot-on;
431 regulator-always-on;
432 regulator-ramp-delay = <1250>;
435 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
437 regulator-name = "buck2";
438 regulator-min-microvolt = <700000>;
439 regulator-max-microvolt = <1300000>;
440 regulator-boot-on;
441 regulator-always-on;
442 regulator-ramp-delay = <1250>;
443 rohm,dvs-run-voltage = <1000000>;
444 rohm,dvs-idle-voltage = <900000>;
447 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
449 regulator-name = "buck3";
450 regulator-min-microvolt = <700000>;
451 regulator-max-microvolt = <1350000>;
452 regulator-boot-on;
453 regulator-always-on;
458 regulator-name = "buck4";
459 regulator-min-microvolt = <3000000>;
460 regulator-max-microvolt = <3300000>;
461 regulator-boot-on;
462 regulator-always-on;
467 regulator-name = "buck5";
468 regulator-min-microvolt = <1605000>;
469 regulator-max-microvolt = <1995000>;
470 regulator-boot-on;
471 regulator-always-on;
476 regulator-name = "buck6";
477 regulator-min-microvolt = <800000>;
478 regulator-max-microvolt = <1400000>;
479 regulator-boot-on;
480 regulator-always-on;
485 regulator-name = "ldo1";
486 regulator-min-microvolt = <1600000>;
487 regulator-max-microvolt = <1900000>;
488 regulator-boot-on;
489 regulator-always-on;
494 regulator-name = "ldo2";
495 regulator-min-microvolt = <800000>;
496 regulator-max-microvolt = <900000>;
497 regulator-boot-on;
498 regulator-always-on;
503 regulator-name = "ldo3";
504 regulator-min-microvolt = <1800000>;
505 regulator-max-microvolt = <3300000>;
506 regulator-boot-on;
507 regulator-always-on;
511 regulator-name = "ldo4";
512 regulator-min-microvolt = <900000>;
513 regulator-max-microvolt = <1800000>;
514 regulator-boot-on;
515 regulator-always-on;
519 regulator-name = "ldo6";
520 regulator-min-microvolt = <900000>;
521 regulator-max-microvolt = <1800000>;
522 regulator-boot-on;
523 regulator-always-on;
530 clock-frequency = <400000>;
531 pinctrl-names = "default", "gpio";
532 pinctrl-0 = <&pinctrl_i2c3>;
533 pinctrl-1 = <&pinctrl_i2c3_gpio>;
534 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
535 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
539 pinctrl-names = "default";
540 pinctrl-0 = <&pinctrl_accel>;
543 st,drdy-int-pin = <1>;
544 interrupt-parent = <&gpio1>;
550 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
551 fsl,clkreq-unsupported;
553 clock-names = "ref";
558 pinctrl-names = "default";
559 pinctrl-0 = <&pinctrl_pcie0>;
560 reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
563 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
565 assigned-clock-rates = <10000000>, <250000000>;
566 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
579 /* off-board RS232/RS485/RS422 */
581 pinctrl-names = "default";
582 pinctrl-0 = <&pinctrl_uart1>;
583 cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
584 rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
585 dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
586 dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
587 dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
593 pinctrl-names = "default";
594 pinctrl-0 = <&pinctrl_uart2>;
600 disable-over-current;
606 pinctrl-names = "default", "state_100mhz", "state_200mhz";
607 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
608 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
609 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
610 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
611 bus-width = <4>;
612 vmmc-supply = <®_3p3v>;
618 pinctrl-names = "default", "state_100mhz", "state_200mhz";
619 pinctrl-0 = <&pinctrl_usdhc3>;
620 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
621 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
622 bus-width = <8>;
623 non-removable;
628 pinctrl-names = "default";
629 pinctrl-0 = <&pinctrl_wdog>;
630 fsl,ext-reset-output;
635 pinctrl-names = "default";
636 pinctrl-0 = <&pinctrl_hog>;
790 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
801 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
812 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
835 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
851 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {