Lines Matching +full:mac +full:- +full:divider
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
30 stdout-path = &uart2;
38 gpio-keys {
39 compatible = "gpio-keys";
41 key-user-pb {
47 key-user-pb1x {
50 interrupt-parent = <&gsc>;
54 key-erased {
57 interrupt-parent = <&gsc>;
61 key-eeprom-wp {
64 interrupt-parent = <&gsc>;
68 key-tamper {
71 interrupt-parent = <&gsc>;
75 switch-hold {
78 interrupt-parent = <&gsc>;
83 led-controller {
84 compatible = "gpio-leds";
86 led-0 {
91 default-state = "off";
94 led-1 {
99 default-state = "off";
102 led-2 {
107 default-state = "off";
110 led-3 {
115 default-state = "off";
118 led-4 {
123 default-state = "off";
126 led-5 {
131 default-state = "off";
134 led-6 {
139 default-state = "off";
142 led-7 {
147 default-state = "off";
150 led-8 {
155 default-state = "off";
158 led-9 {
163 default-state = "off";
166 led-a {
171 default-state = "off";
174 led-b {
179 default-state = "off";
183 pcie0_refclk: pcie0-refclk {
184 compatible = "fixed-clock";
185 #clock-cells = <0>;
186 clock-frequency = <100000000>;
189 reg_3p3v: regulator-3p3v {
190 compatible = "regulator-fixed";
191 regulator-name = "3P3V";
192 regulator-min-microvolt = <3300000>;
193 regulator-max-microvolt = <3300000>;
196 regulator-ioexp {
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_reg_ioexp>;
199 compatible = "regulator-fixed";
200 regulator-name = "ioexp";
202 enable-active-high;
203 startup-delay-us = <100>;
204 regulator-min-microvolt = <3300000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-always-on;
209 regulator-isouart {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_reg_isouart>;
212 compatible = "regulator-fixed";
213 regulator-name = "iso_uart";
215 startup-delay-us = <100>;
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-always-on;
221 reg_usb2_vbus: regulator-usb2 {
222 pinctrl-names = "default";
223 pinctrl-0 = <&pinctrl_reg_usb2>;
224 compatible = "regulator-fixed";
225 regulator-name = "usb_usb2_vbus";
227 enable-active-high;
228 regulator-min-microvolt = <5000000>;
229 regulator-max-microvolt = <5000000>;
232 reg_wifi: regulator-wifi {
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_reg_wl>;
235 compatible = "regulator-fixed";
236 regulator-name = "wifi";
238 enable-active-high;
239 startup-delay-us = <100>;
240 regulator-min-microvolt = <3300000>;
241 regulator-max-microvolt = <3300000>;
246 cpu-supply = <&buck2>;
250 cpu-supply = <&buck2>;
254 cpu-supply = <&buck2>;
258 cpu-supply = <&buck2>;
262 operating-points-v2 = <&ddrc_opp_table>;
264 ddrc_opp_table: opp-table {
265 compatible = "operating-points-v2";
267 opp-25000000 {
268 opp-hz = /bits/ 64 <25000000>;
271 opp-100000000 {
272 opp-hz = /bits/ 64 <100000000>;
275 opp-750000000 {
276 opp-hz = /bits/ 64 <750000000>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_spi1>;
288 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
293 compatible = "jedec,spi-nor";
295 spi-max-frequency = <40000000>;
300 compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
302 spi-max-frequency = <36000000>;
307 pinctrl-names = "default";
308 pinctrl-0 = <&pinctrl_fec1>;
309 phy-mode = "rgmii-id";
310 local-mac-address = [00 00 00 00 00 00];
313 fixed-link {
315 full-duplex;
320 gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
328 gpio-line-names = "", "", "", "",
336 gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
351 clock-frequency = <100000>;
352 pinctrl-names = "default", "gpio";
353 pinctrl-0 = <&pinctrl_i2c1>;
354 pinctrl-1 = <&pinctrl_i2c1_gpio>;
355 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
356 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
362 pinctrl-0 = <&pinctrl_gsc>;
363 interrupt-parent = <&gpio4>;
365 interrupt-controller;
366 #interrupt-cells = <1>;
367 #address-cells = <1>;
368 #size-cells = <0>;
371 compatible = "gw,gsc-adc";
372 #address-cells = <1>;
373 #size-cells = <0>;
391 gw,voltage-divider-ohms = <22100 1000>;
398 gw,voltage-divider-ohms = <22100 1000>;
405 gw,voltage-divider-ohms = <22100 1000>;
412 gw,voltage-divider-ohms = <10000 10000>;
419 gw,voltage-divider-ohms = <10000 10000>;
462 gw,voltage-divider-ohms = <10000 10000>;
470 gpio-controller;
471 #gpio-cells = <2>;
472 interrupt-parent = <&gsc>;
507 clock-frequency = <400000>;
508 pinctrl-names = "default", "gpio";
509 pinctrl-0 = <&pinctrl_i2c2>;
510 pinctrl-1 = <&pinctrl_i2c2_gpio>;
511 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
512 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
518 pinctrl-names = "default";
519 pinctrl-0 = <&pinctrl_pmic>;
520 interrupt-parent = <&gpio3>;
522 rohm,reset-snvs-powered;
523 #clock-cells = <0>;
525 clock-output-names = "clk-32k-out";
528 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
530 regulator-name = "buck1";
531 regulator-min-microvolt = <700000>;
532 regulator-max-microvolt = <1300000>;
533 regulator-boot-on;
534 regulator-always-on;
535 regulator-ramp-delay = <1250>;
538 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
540 regulator-name = "buck2";
541 regulator-min-microvolt = <700000>;
542 regulator-max-microvolt = <1300000>;
543 regulator-boot-on;
544 regulator-always-on;
545 regulator-ramp-delay = <1250>;
546 rohm,dvs-run-voltage = <1000000>;
547 rohm,dvs-idle-voltage = <900000>;
550 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
552 regulator-name = "buck3";
553 regulator-min-microvolt = <700000>;
554 regulator-max-microvolt = <1350000>;
555 regulator-boot-on;
556 regulator-always-on;
561 regulator-name = "buck4";
562 regulator-min-microvolt = <3000000>;
563 regulator-max-microvolt = <3300000>;
564 regulator-boot-on;
565 regulator-always-on;
570 regulator-name = "buck5";
571 regulator-min-microvolt = <1605000>;
572 regulator-max-microvolt = <1995000>;
573 regulator-boot-on;
574 regulator-always-on;
579 regulator-name = "buck6";
580 regulator-min-microvolt = <800000>;
581 regulator-max-microvolt = <1400000>;
582 regulator-boot-on;
583 regulator-always-on;
588 regulator-name = "ldo1";
589 regulator-min-microvolt = <1600000>;
590 regulator-max-microvolt = <1900000>;
591 regulator-boot-on;
592 regulator-always-on;
597 regulator-name = "ldo2";
598 regulator-min-microvolt = <800000>;
599 regulator-max-microvolt = <900000>;
600 regulator-boot-on;
601 regulator-always-on;
606 regulator-name = "ldo3";
607 regulator-min-microvolt = <1800000>;
608 regulator-max-microvolt = <3300000>;
609 regulator-boot-on;
610 regulator-always-on;
614 regulator-name = "ldo4";
615 regulator-min-microvolt = <900000>;
616 regulator-max-microvolt = <1800000>;
617 regulator-boot-on;
618 regulator-always-on;
622 regulator-name = "ldo6";
623 regulator-min-microvolt = <900000>;
624 regulator-max-microvolt = <1800000>;
625 regulator-boot-on;
626 regulator-always-on;
633 clock-frequency = <400000>;
634 pinctrl-names = "default", "gpio";
635 pinctrl-0 = <&pinctrl_i2c3>;
636 pinctrl-1 = <&pinctrl_i2c3_gpio>;
637 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
638 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
644 gpio-controller;
645 #gpio-cells = <2>;
651 pinctrl-0 = <&pinctrl_ksz>;
652 interrupt-parent = <&gpio4>;
656 #address-cells = <1>;
657 #size-cells = <0>;
662 phy-mode = "internal";
663 local-mac-address = [00 00 00 00 00 00];
669 phy-mode = "internal";
670 local-mac-address = [00 00 00 00 00 00];
676 phy-mode = "internal";
677 local-mac-address = [00 00 00 00 00 00];
683 phy-mode = "internal";
684 local-mac-address = [00 00 00 00 00 00];
690 phy-mode = "rgmii-id";
692 fixed-link {
694 full-duplex;
707 clock-frequency = <400000>;
708 pinctrl-names = "default", "gpio";
709 pinctrl-0 = <&pinctrl_i2c4>;
710 pinctrl-1 = <&pinctrl_i2c4_gpio>;
711 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
712 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
717 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
718 fsl,clkreq-unsupported;
720 clock-names = "ref";
725 pinctrl-names = "default";
726 pinctrl-0 = <&pinctrl_pcie0>;
727 reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
730 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
732 assigned-clock-rates = <10000000>, <250000000>;
733 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
751 pinctrl-names = "default";
752 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
753 rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
754 cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
755 dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
756 dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
757 dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
763 pinctrl-names = "default";
764 pinctrl-0 = <&pinctrl_uart2>;
769 pinctrl-names = "default";
770 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
771 cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
772 rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
777 pinctrl-names = "default";
778 pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
779 cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
780 rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
786 disable-over-current;
792 vbus-supply = <®_usb2_vbus>;
793 over-current-active-low;
799 pinctrl-names = "default", "state_100mhz", "state_200mhz";
800 pinctrl-0 = <&pinctrl_usdhc1>;
801 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
802 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
803 bus-width = <4>;
804 non-removable;
805 vmmc-supply = <®_wifi>;
806 #address-cells = <1>;
807 #size-cells = <0>;
811 compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
818 pinctrl-names = "default", "state_100mhz", "state_200mhz";
819 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
820 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
821 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
822 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
823 bus-width = <4>;
824 vmmc-supply = <®_3p3v>;
830 pinctrl-names = "default", "state_100mhz", "state_200mhz";
831 pinctrl-0 = <&pinctrl_usdhc3>;
832 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
833 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
834 bus-width = <8>;
835 non-removable;
840 pinctrl-names = "default";
841 pinctrl-0 = <&pinctrl_wdog>;
842 fsl,ext-reset-output;
847 pinctrl-names = "default";
848 pinctrl-0 = <&pinctrl_hog>;
1076 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
1087 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
1109 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
1120 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1131 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
1154 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1170 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {