Lines Matching +full:regulator +full:- +full:min +full:- +full:microamp
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/net/ti-dp83867.h>
17 gpio-keys {
18 compatible = "gpio-keys";
20 key-user-pb {
26 key-user-pb1x {
29 interrupt-parent = <&gsc>;
33 key-erased {
36 interrupt-parent = <&gsc>;
40 key-eeprom-wp {
43 interrupt-parent = <&gsc>;
47 key-tamper {
50 interrupt-parent = <&gsc>;
54 switch-hold {
57 interrupt-parent = <&gsc>;
64 cpu-supply = <&buck3_reg>;
68 cpu-supply = <&buck3_reg>;
72 cpu-supply = <&buck3_reg>;
76 cpu-supply = <&buck3_reg>;
80 operating-points-v2 = <&ddrc_opp_table>;
82 ddrc_opp_table: opp-table {
83 compatible = "operating-points-v2";
85 opp-25000000 {
86 opp-hz = /bits/ 64 <25000000>;
89 opp-100000000 {
90 opp-hz = /bits/ 64 <100000000>;
93 opp-750000000 {
94 opp-hz = /bits/ 64 <750000000>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_fec1>;
102 phy-mode = "rgmii-id";
103 phy-handle = <ðphy0>;
107 #address-cells = <1>;
108 #size-cells = <0>;
110 ethphy0: ethernet-phy@0 {
111 compatible = "ethernet-phy-ieee802.3-c22";
113 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
114 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
115 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
116 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
119 #address-cells = <1>;
120 #size-cells = <0>;
126 default-state = "keep";
133 default-state = "keep";
141 clock-frequency = <100000>;
142 pinctrl-names = "default", "gpio";
143 pinctrl-0 = <&pinctrl_i2c1>;
144 pinctrl-1 = <&pinctrl_i2c1_gpio>;
145 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
146 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
152 pinctrl-0 = <&pinctrl_gsc>;
153 interrupt-parent = <&gpio2>;
155 interrupt-controller;
156 #interrupt-cells = <1>;
157 #address-cells = <1>;
158 #size-cells = <0>;
161 compatible = "gw,gsc-adc";
162 #address-cells = <1>;
163 #size-cells = <0>;
187 gw,voltage-divider-ohms = <22100 1000>;
194 gw,voltage-divider-ohms = <10000 10000>;
201 gw,voltage-divider-ohms = <10000 10000>;
226 gw,voltage-divider-ohms = <10000 10000>;
233 gw,voltage-divider-ohms = <10000 10000>;
252 gw,voltage-divider-ohms = <10000 10000>;
256 fan-controller@0 {
257 compatible = "gw,gsc-fan";
265 gpio-controller;
266 #gpio-cells = <2>;
267 interrupt-parent = <&gsc>;
307 regulator-name = "buck1";
308 regulator-min-microvolt = <800000>;
309 regulator-max-microvolt = <1000000>;
310 regulator-min-microamp = <3800000>;
311 regulator-max-microamp = <6800000>;
312 regulator-boot-on;
313 regulator-always-on;
318 regulator-name = "buck2";
319 regulator-min-microvolt = <800000>;
320 regulator-max-microvolt = <900000>;
321 regulator-min-microamp = <2200000>;
322 regulator-max-microamp = <5200000>;
323 regulator-boot-on;
324 regulator-always-on;
329 regulator-name = "buck3";
330 regulator-min-microvolt = <800000>;
331 regulator-max-microvolt = <1000000>;
332 regulator-min-microamp = <3800000>;
333 regulator-max-microamp = <6800000>;
334 regulator-always-on;
339 regulator-name = "buck4";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
342 regulator-min-microamp = <2200000>;
343 regulator-max-microamp = <5200000>;
344 regulator-boot-on;
345 regulator-always-on;
350 regulator-name = "ldo1";
351 regulator-min-microvolt = <1800000>;
352 regulator-max-microvolt = <1800000>;
353 regulator-boot-on;
354 regulator-always-on;
359 regulator-name = "ldo2";
360 regulator-min-microvolt = <800000>;
361 regulator-max-microvolt = <800000>;
362 regulator-boot-on;
363 regulator-always-on;
368 regulator-name = "ldo3";
369 regulator-min-microvolt = <900000>;
370 regulator-max-microvolt = <900000>;
371 regulator-boot-on;
372 regulator-always-on;
377 regulator-name = "ldo4";
378 regulator-min-microvolt = <1800000>;
379 regulator-max-microvolt = <1800000>;
380 regulator-boot-on;
381 regulator-always-on;
388 clock-frequency = <400000>;
389 pinctrl-names = "default", "gpio";
390 pinctrl-0 = <&pinctrl_i2c2>;
391 pinctrl-1 = <&pinctrl_i2c2_gpio>;
392 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
393 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_uart2>;
412 pinctrl-names = "default", "state_100mhz", "state_200mhz";
413 pinctrl-0 = <&pinctrl_usdhc3>;
414 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
415 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
416 bus-width = <8>;
417 non-removable;
422 pinctrl-names = "default";
423 pinctrl-0 = <&pinctrl_wdog>;
424 fsl,ext-reset-output;
506 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
522 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {