dts/exynos/exynos7885-jackpotlte.dts

1 // SPDX-License-Identifier: GPL-2.0
3  * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
18 	chassis-type = "handset";
28 		stdout-path = &serial_2;
38 	gpio-keys {
39 		compatible = "gpio-keys";
40 		pinctrl-names = "default";
41 		pinctrl-0 = <&key_volup &key_voldown &key_power>;
43 		volup-key {
46 			gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
49 		voldown-key {
52 			gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
55 		power-key {
58 			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
59 			wakeup-source;
66 	mmc-hs200-1_8v;
67 	mmc-hs400-1_8v;
68 	cap-mmc-highspeed;
69 	non-removable;
70 	mmc-hs400-enhanced-strobe;
71 	card-detect-delay = <200>;
72 	clock-frequency = <800000000>;
73 	bus-width = <8>;
74 	samsung,dw-mshc-ciu-div = <3>;
75 	samsung,dw-mshc-sdr-timing = <0 4>;
76 	samsung,dw-mshc-ddr-timing = <2 4>;
77 	samsung,dw-mshc-hs400-timing = <0 2>;
79 	pinctrl-names = "default";
80 	pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs
85 	clock-frequency = <26000000>;
89 	key_volup: key-volup-pins {
90 		samsung,pins = "gpa1-5";
91 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
92 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
93 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
96 	key_voldown: key-voldown-pins {
97 		samsung,pins = "gpa1-6";
98 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
99 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
100 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
103 	key_power: key-power-pins {
104 		samsung,pins = "gpa1-7";
105 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
106 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
107 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;