Lines Matching +full:fixed +full:- +full:header
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/sound/meson-aiu.h>
13 #include "meson-gxl-s905x.dtsi"
16 compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
17 "amlogic,meson-gxl";
18 model = "Libre Computer AML-S905X-CC";
25 dio2133: analog-amplifier {
26 compatible = "simple-audio-amplifier";
27 sound-name-prefix = "AU2";
28 VCC-supply = <&hdmi_5v>;
29 enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
33 stdout-path = "serial0:115200n8";
36 cvbs-connector {
37 compatible = "composite-video-connector";
41 remote-endpoint = <&cvbs_vdac_out>;
46 emmc_pwrseq: emmc-pwrseq {
47 compatible = "mmc-pwrseq-emmc";
48 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
51 hdmi-connector {
52 compatible = "hdmi-connector";
57 remote-endpoint = <&hdmi_tx_tmds_out>;
63 compatible = "gpio-leds";
65 led-system {
66 label = "librecomputer:system-status";
68 default-state = "on";
69 panic-indicator;
72 led-blue {
75 linux,default-trigger = "heartbeat";
84 hdmi_5v: regulator-hdmi-5v {
85 compatible = "regulator-fixed";
87 regulator-name = "HDMI_5V";
88 regulator-min-microvolt = <5000000>;
89 regulator-max-microvolt = <5000000>;
92 enable-active-high;
93 regulator-always-on;
96 vcc_3v3: regulator-vcc-3v3 {
97 compatible = "regulator-fixed";
98 regulator-name = "VCC_3V3";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
103 vcc_card: regulator-vcc-card {
104 compatible = "regulator-gpio";
106 regulator-name = "VCC_CARD";
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <3300000>;
111 gpios-states = <0>;
116 regulator-settling-time-up-us = <200>;
117 regulator-settling-time-down-us = <50000>;
120 vddio_ao18: regulator-vddio-ao18 {
121 compatible = "regulator-fixed";
122 regulator-name = "VDDIO_AO18";
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <1800000>;
128 vddio_boot: regulator-vddio-boot {
129 compatible = "regulator-fixed";
130 regulator-name = "VDDIO_BOOT";
131 regulator-min-microvolt = <1800000>;
132 regulator-max-microvolt = <1800000>;
133 vin-supply = <&vcc_3v3>;
137 compatible = "amlogic,gx-sound-card";
138 model = "LIBRETECH-CC";
139 audio-aux-devs = <&dio2133>;
140 audio-widgets = "Line", "Lineout";
141 audio-routing = "AU2 INL", "ACODEC LOLN",
149 assigned-clocks = <&clkc CLKID_MPLL0>,
152 assigned-clock-parents = <0>, <0>, <0>;
153 assigned-clock-rates = <294912000>,
157 dai-link-0 {
158 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
161 dai-link-1 {
162 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
163 dai-format = "i2s";
164 mclk-fs = <256>;
166 codec-0 {
167 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
170 codec-1 {
171 sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
175 dai-link-2 {
176 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
178 codec-0 {
179 sound-dai = <&hdmi_tx>;
183 dai-link-3 {
184 sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
186 codec-0 {
187 sound-dai = <&acodec>;
194 AVDD-supply = <&vddio_ao18>;
204 pinctrl-0 = <&ao_cec_pins>;
205 pinctrl-names = "default";
206 hdmi-phandle = <&hdmi_tx>;
211 remote-endpoint = <&cvbs_connector_in>;
220 pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
221 pinctrl-names = "default";
226 pinctrl-0 = <&remote_input_ao_pins>;
227 pinctrl-names = "default";
232 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
233 pinctrl-names = "default";
234 hdmi-supply = <&hdmi_5v>;
239 remote-endpoint = <&hdmi_connector_in>;
244 gpio-line-names = "UART TX",
248 "7J1 Header Pin5",
249 "7J1 Header Pin3",
250 "7J1 Header Pin12",
252 "9J3 Switch HDMI CEC/7J1 Header Pin11",
253 "7J1 Header Pin13",
255 "7J1 Header Pin15";
259 gpio-line-names = /* Bank GPIOZ */
265 "HDMI_5V_EN", "9J1 Header Pin2",
267 "2J3 Header Pin6",
268 "2J3 Header Pin5",
269 "2J3 Header Pin4",
270 "2J3 Header Pin3",
283 "7J1 Header Pin27", "7J1 Header Pin28",
286 "7J1 Header Pin22", "7J1 Header Pin26",
287 "7J1 Header Pin36", "7J1 Header Pin38",
288 "7J1 Header Pin40", "7J1 Header Pin37",
289 "7J1 Header Pin33", "7J1 Header Pin35",
290 "7J1 Header Pin19", "7J1 Header Pin21",
291 "7J1 Header Pin24", "7J1 Header Pin23",
292 "7J1 Header Pin8", "7J1 Header Pin10",
293 "7J1 Header Pin16", "7J1 Header Pin18",
294 "7J1 Header Pin32", "7J1 Header Pin29",
295 "7J1 Header Pin31",
297 "7J1 Header Pin7", "";
302 vref-supply = <&vddio_ao18>;
308 pinctrl-0 = <&sdcard_pins>;
309 pinctrl-1 = <&sdcard_clk_gate_pins>;
310 pinctrl-names = "default", "clk-gate";
312 bus-width = <4>;
313 cap-sd-highspeed;
314 max-frequency = <50000000>;
315 disable-wp;
317 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
319 vmmc-supply = <&vcc_3v3>;
320 vqmmc-supply = <&vcc_card>;
326 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
327 pinctrl-1 = <&emmc_clk_gate_pins>;
328 pinctrl-names = "default", "clk-gate";
330 bus-width = <8>;
331 cap-mmc-highspeed;
332 mmc-ddr-1_8v;
333 mmc-hs200-1_8v;
334 max-frequency = <200000000>;
335 disable-wp;
337 mmc-pwrseq = <&emmc_pwrseq>;
338 vmmc-supply = <&vcc_3v3>;
339 vqmmc-supply = <&vddio_boot>;
344 pinctrl-0 = <&uart_ao_a_pins>;
345 pinctrl-names = "default";
358 phy-supply = <&hdmi_5v>;